Smith Bearing® CR-3-XB Cylindrical Stud Type Needle Bearing Cam Follower, 3 in Dia x 1-3/4 in W Roller, 1-1/4 in Dia x 2-1/2 in L Stud, 52100 Steel Roller
Hex head stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel.
-
BrandSmith Bearing®
-
UPC651041101364
-
Manufacturer Part NumberCR-3-XB
-
CountryUSA
-
Load Capacity20200 lb Dynamic/25260 lb Static
-
Thread Length1-1/4 in
-
Thread Size1-1/4-12 UNF-2A
-
Closure TypeSealed
-
TypeCylindrical Stud Type
-
Roller Diameter3 in
-
Roller Material52100 Steel
-
Roller Width1-3/4 in
-
Head TypeHex Socket
-
SeriesCR-XB
-
Stud Diameter1-1/4 in
-
Stud Length2-1/2 in
-
Stud MaterialCarbon Steel
-
Stud TypeStandard
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 13W742 |
-
UNSPSC31171530
-
Warranty12 months
-
Full Engineering Drawing
-
Catalog
Recently Viewed
Smith Bearing® CR-3-XB Cylindrical Stud Type Needle Bearing Cam Follower, 3 in Dia x 1-3/4 in W Roller, 1-1/4 in Dia x 2-1/2 in L Stud, 52100 Steel Roller
Hex head stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel.
MCR Safety PA112AF Plasma® Lightweight Safety Glasses, Duramass® Anti-Fog, Gray Lens, Wrap Around Frame, Black, Polycarbonate Frame, ANSI Z87+
Smith Bearing® CR-1-1/2-X Cylindrical Stud Type Needle Bearing Cam Follower, 1-1/2 in Dia x 7/8 in W Roller, 5/8 in Dia x 1-1/2 in L Stud, 52100 Steel Roller
Screwdriver slot stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel. Most commonly used general purpose cam follower and available in sealed versions.
Browning® 767724 VPLS 100 Intermediate Duty Low Base Pillow Block Ball Bearing Unit, 15/16 in Dia Bore, 3-23/32 to 4-17/32 in L Bolt Center-to-Center, 1-5/16 in Base to Bore Centerline, 5-1/2 in OAL x 2-11/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Browning® Classical Gripbelt® 1042415 BK Series Type 1 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 3-3/4 in OD, 3.2 in (A)/3.7 in (B) Dia Pitch, 7/8 in W Face
Rubicon® T4 Series Curved Frameless Lens Design Soft TPR Nose Piece Non-Slip Temple Material Resilient spring hinge temples for comfortable fit The Rubicon® T4 series curved frameless lens design offers a close orbital seal for increased protection, a soft gel nose piece for added comfort, and durable metal temples with non-slip, soft temple material. The frameless design keeps your line of vision clear, helping you focus on the task at hand. These high-quality safety glasses have a lifetime frame warranty and are engineered to provide the highest level of innovation for consumers who demand the very best. Choose the best safety glasses, choose MCR Safety! This product meets the ANSI/ISEA Z87.1-2025 standard.
