Smith Bearing® CR-1/2-X CR-X Cylindrical Stud Type Needle Bearing Cam Follower, 1/2 in Dia x 3/8 in W Roller, 0.19 in Dia x 5/8 in L Stud, 52100 Steel Roller

Flat Follower & Track Runners

$23.18

Screwdriver slot stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel. Most commonly used general purpose cam follower and available in sealed versions.

1/2X1/2X3/8-BT 1/2" X 1/2" X 3/8" Black

PEX Tees

$2.29

1/2" X 1/2" X 3/8" BLACK TEE-FIT1/2X1/2X3/8BT >

Browning 1-GRV A-BELT H-BUSH SHEAVES BRW AK-44-H

Single Groove Sheaves

$38.65

Browning® Classical Gripbelt® 1042126 AK Series Type 1 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 4-1/4 in OD, 4.2 in (A)/3.66 in (3L) Dia Pitch, 3/4 in W Face

MasterDrive L075-14MM L075 Standard Jaw Coupling, 14 mm Dia Bore, 0.82 in L Through Bore, 1.75 in Dia Hub, Powdered Metal

Jaw Coupling Hubs

$10.76

Jaw Couplings provide standard shaft-to-shaft connection for general duty applications. Two hubs are used in pair with an elastomer or bronze element (spider), each sold seperately. The element eliminates metal-to-metal contact and acts as a shock absorber. The design is fail-safe in that it will perform if the element fails.

1/2X1/2X1/4-BT 1/2" X 1/2" X 1/4" Black

PEX Tees

$2.71

1/2" X 1/2" X 1/4" BLACK TEE-FIT1/2X1/2X1/4BT >

IDW_IMAGE_78c3af6cf5332c6033cb3ca5cfc4737b63bea49c6700146b60e5fc92afa2a6ae

Dodge® 131843 209 Normal Duty Pillow Block Ball Bearing Unit, 1-11/16 in Dia Bore, 5.5 to 6.19 in L Bolt Center-to-Center, 2.06 in Base to Bore Centerline, 7.44 in OAL x 4.21 in OAH

Pillow Block Ball Bearing Units

$210.39

For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value. The Dodge® eccentric ball bearing is manufactured at the state-of-the-art Dodge® bearing plant in Rogersville, Tennessee - an ISO 9002 certified plant.

My Wishlist

Compare

Smith Bearing® CR-1/2-X CR-X Cylindrical Stud Type Needle Bearing Cam Follower, 1/2 in Dia x 3/8 in W Roller, 0.19 in Dia x 5/8 in L Stud, 52100 Steel Roller

Recently Viewed