IKO Bearings 26-MM-OD STUD-TYPE CAM FOLLOWERS IKO CF-10-1-V-UU-R
IKO designs and manufactures a broad selection of Cam Followers to meet the diverse needs of applications including machine tools, industrial robots, electronic parts production and office automation equipment. A Cam Follower is a bearing that incorporates needle style rollers between a stud and a thick outer ring.
-
BrandIKO
-
Manufacturer Part NumberCF101VUUR
-
CountryUSA
-
Load Capacity9570 N Dynamic/14500 N Static
-
Closure TypeSealed
-
Head TypeScrewdriver Slot
- Small coefficient of friction
- Excellent rotational performance designed for outer ring revolution
- High load capacity by design - radial gap is smaller than within the general needle roller bearings, alleviating impact load and increasing lifetime
- Easy attachment with either hexagon sockets or screw driver slots
- Standard Cam Followers are the basic style and suit a wide range of applications
- Easy lubrication with oil supplied from the stud head with a hexagon socket design
-
UNSPSC31171530
-
Catalog
Recently Viewed
IKO Bearings 26-MM-OD STUD-TYPE CAM FOLLOWERS IKO CF-10-1-V-UU-R
IKO designs and manufactures a broad selection of Cam Followers to meet the diverse needs of applications including machine tools, industrial robots, electronic parts production and office automation equipment. A Cam Follower is a bearing that incorporates needle style rollers between a stud and a thick outer ring.
BBI 489082 Fully Threaded Carriage Bolt, 3/8-16, 4 in L Under Head, Low Carbon Steel, A Grade, Zinc CR+3
BBI 489082 Fully Threaded Carriage Bolt, 3/8-16, 4 in L Under Head, Low Carbon Steel, A Grade, Zinc CR+3
WATTS® 0371271 530C Calibrated Pressure Relief Valve, 1/2 in Nominal, MNPT x FNPT End Style, 50 to 175 psi Pressure, Brass Body
This 1/2 inch calibrated pressure relief valve is used in commercial, residential and industrial applications to protect against excessive pressure in systems containing water, oil, or air. It consists of a bronze body construction with NPT threaded male inlet and NPT threaded female (drain) outlet connections, stainless steel spring, brass bonnet, Buna-N disc, and Buna-N O-ring. Series 530C has a calibrated adjustment feature for setting the valve to the required relief pressure, and is ideal for bypass thermal expansion pressure relief (not ASME approved). It is for use in fire protection systems. The maximum pressure is 300 psi (20.67 bar). The adjustable pressure range is 50 to 175 psi (3.45 to 12.06 bar).
4 RAISED FACE SLIP-ON FLANGES
HCI Preferred Supplier 46935SS Mini Ball Valve, 1/4 in Nominal, FIP End Style, CF8/CF8M Stainless Steel Body, NBR Softgoods
HCI Preferred Supplier 46935SS Mini Ball Valve, 1/4 in Nominal, FIP End Style, CF8/CF8M Stainless Steel Body, NBR Softgoods
Premium line of professional quality bi-metal hole saws feature an M3 high-speed steel cutting edge, electron beam welded to a tough steel backer. Caps stand up to abuse and punishment, yet are lighter and easier to use than those of competitors. Cutting depth is 1-1/2 in. Arbor required.
