Deep Groove Ball Bearings
Koyo Bearing DOUBLE-SHIELDED THIN BALL BEARINGS KOY 6808-ZZ
Koyo 6808 ZZ Caged Cylindrical Bore Ultra Light Deep Groove Ball Bearing, 40 mm Dia Bore, 52 mm OD, 1 Row, 7 mm W, 6.15 kN Dynamic/4.2 kN Static Load
Koyo Bearing DOUBLE-SHIELDED THIN BALL BEARINGS KOY 6908-ZZ
Koyo 6908ZZ 6900 Round Deep Groove Ball Bearing, 40 mm Dia Bore, 62 mm Dia Outside, 1 Rows, 12 mm W, 17.1 kN Dynamic/9.95 kN Static Load
Koyo Bearing DOUBLE-SHIELDED THIN BALL BEARINGS KOY 6909-ZZ
Koyo 6909ZZ 6900 Round Deep Groove Ball Bearing, 45 mm Dia Bore, 68 mm Dia Outside, 1 Rows, 12 mm W, 17.7 kN Dynamic/10.9 kN Static Load
MB-35-3-7/16 MCGILL/EMERSON POWER TRANSMISSION PRODUCTS
3-7/16"-ID SPH/OD INSERT BEARINGS-MCGSB353716>
NACHI DOUBLE SEALED BALL BEARINGS NAC 6004-2-NSE
NACHI 6004 2NSE Deep Groove Ball Bearing, 20 mm Dia Bore, 42 mm OD, 12 mm W, 9400 N Dynamic/5000 N Static Load
NACHI DOUBLE SEALED BALL BEARINGS NAC 626-2-NSL
NACHI 626 2NSL 600 Ball Bearing with Contact Seal, 6 mm Dia Bore, 19 mm OD, 1 Rows, 6 mm W, 2522 N Dynamic/1057 N Static Load
NACHI DOUBLE SHEILDED BALL BEARING W/SR NAC 6200-ZZ-ENR
Because of their versatility, Single-row, Deep-groove Ball Bearings are the most popular of all the ball bearing types. NACHI Deep-groove Ball Bearings are available in a wide range of series defined by the JIS (ISO) standard dimension plan and are also made to meet specialized dimension and configuration requirements.
NACHI DOUBLE SHIELDED BALL BEARINGS WSR NAC 6301-ZZ-NR
Single-row deep groove ball bearings are the most common bearing type in the world due to their versatility and performance. These bearings are available in a variety of seal, shield and snap-ring arrangements. Bearings with seals or shields are standardized and already contain the proper amount of grease. Open bearings will require lubrication. These bearings can sustain radial and/or axial loads and because of their simple design, this bearing type can be produced to provide both high-running accuracy and high-speed operation.
NSK Bearings 3/4"-ID BALL BEARINGS NSK R-12-Z
Deep Groove Ball Bearings (DGBB) are the most common form of rolling bearings and are used in a variety of applications, particularly those where high speeds and low power loss are required. NSK DGBB can handle not only radial forces, but also moderate axial loads in both directions. They are easy to install and can be deployed in a variety of configurations.
NSK Bearings 30-MM SINGLE-SHIELD BALL BEARINGS NSK 6006-Z
Deep Groove Ball Bearings (DGBB) are the most common form of rolling bearings and are used in a variety of applications, particularly those where high speeds and low power loss are required. NSK DGBB can handle not only radial forces, but also moderate axial loads in both directions. They are easy to install and can be deployed in a variety of configurations.
NSK Bearings DOUBLE OPEN BALL BEARINGS NSK R-18
Deep Groove Ball Bearings (DGBB) are the most common form of rolling bearings and are used in a variety of applications, particularly those where high speeds and low power loss are required. NSK DGBB can handle not only radial forces, but also moderate axial loads in both directions. They are easy to install and can be deployed in a variety of configurations.
NSK Bearings DOUBLE-SEALED BALL BEARINGS NSK 6204-VV
Deep Groove Ball Bearings (DGBB) are the most common form of rolling bearings and are used in a variety of applications, particularly those where high speeds and low power loss are required. NSK DGBB can handle not only radial forces, but also moderate axial loads in both directions. They are easy to install and can be deployed in a variety of configurations.
NSK Bearings DOUBLE-SEALED BALL BEARINGS NSK 6304-DD-UC-3
Deep Groove Ball Bearings (DGBB) are the most common form of rolling bearings and are used in a variety of applications, particularly those where high speeds and low power loss are required. NSK DGBB can handle not only radial forces, but also moderate axial loads in both directions. They are easy to install and can be deployed in a variety of configurations.
NSK Bearings DOUBLE-SEALED BALL BEARINGS NSK 6305-VV
Deep Groove Ball Bearings (DGBB) are the most common form of rolling bearings and are used in a variety of applications, particularly those where high speeds and low power loss are required. NSK DGBB can handle not only radial forces, but also moderate axial loads in both directions. They are easy to install and can be deployed in a variety of configurations.
NSK Bearings DOUBLE-SHIELDED BALL BEARINGS NSK 6209-ZZ
Deep Groove Ball Bearings (DGBB) are the most common form of rolling bearings and are used in a variety of applications, particularly those where high speeds and low power loss are required. NSK DGBB can handle not only radial forces, but also moderate axial loads in both directions. They are easy to install and can be deployed in a variety of configurations.
NSK Bearings DOUBLE-SHIELDED BALL BEARINGS NSK 6307-ZZ
Deep Groove Ball Bearings (DGBB) are the most common form of rolling bearings and are used in a variety of applications, particularly those where high speeds and low power loss are required. NSK DGBB can handle not only radial forces, but also moderate axial loads in both directions. They are easy to install and can be deployed in a variety of configurations.
NSK Bearings DOUBLE-SHIELDED BALL BEARINGS NSK 6308-ZZ
Deep Groove Ball Bearings (DGBB) are the most common form of rolling bearings and are used in a variety of applications, particularly those where high speeds and low power loss are required. NSK DGBB can handle not only radial forces, but also moderate axial loads in both directions. They are easy to install and can be deployed in a variety of configurations.
NSK Bearings SINGLE-SHIELDED BALL BEARINGS NSK 608-Z
Deep Groove Ball Bearings (DGBB) are the most common form of rolling bearings and are used in a variety of applications, particularly those where high speeds and low power loss are required. NSK DGBB can handle not only radial forces, but also moderate axial loads in both directions. They are easy to install and can be deployed in a variety of configurations.
R-20 Double Open Face Ball Bearing
DOUBLE OPEN FACE BALL BEARING - GULR20>
R-8-ZZ Double Shielded Ball Bearing
The MRC SR8-ZZ (or R8-ZZ) is an extra-small, inch-series deep groove ball bearing. Featuring double metal shielding to keep dust out and retain grease, this stainless-steel bearing is typically used in miniature applications, medical instruments, and light industrial equipment. Dimensional Specifications Inner Diameter (ID): 0.5000 in (1/2") Outer Diameter (OD): 1.1250 in (1-1/8") Width: 0.3125 in (5/16")
RB-1030 Roller Bearing With Metal Cage
ROLLER BEARING WITH METAL CAGE-EZRRB1030 >
Recently Viewed
Crosby® 1018543, S209-1, Anchor Shackle, 8.5 ton Load, 1 in, 1.13 in Dia Screw Pin, Self-Colored
Crosby® 1018543 Anchor Shackle, 8.5 ton Load, 1 in, 1.13 in Dia Screw Pin, Self-Colored
Wilton 1206 Cam Action Drill Press Vise, 6" Jaw Width, 6-3/16" Jaw Opening
With the Wilton Cam Action Drill Press, a simple push or pull on the center bar knob sets the jaw in position
Apollo™ 7010727 70-100 2-Piece Ball Valve, 1-1/2 in Nominal, FNPT End Style, Bronze Body, Standard Port, MPTFE/RPTFE Softgoods, Domestic
The Apollo™ 70 Series is the most widely used general purpose bronze ball valve on the market today. The 70-100 model is a 2-piece standard port ball valve featuring female NPT connections. Cast and machined in Apollo™'s South Carolina manufacturing plants, these valves provide trusted performance and a wide range of options.
Apollo™ 7010327 70-100 2-Piece Ball Valve, 1/2 in Nominal, FNPT End Style, Bronze Body, Standard Port, MPTFE/RPTFE Softgoods, Domestic
The Apollo™ 70 Series is the most widely used general purpose bronze ball valve on the market today. The 70-100 model is a 2-piece standard port ball valve featuring female NPT connections. Cast and machined in Apollo™'s South Carolina manufacturing plants, these valves provide trusted performance and a wide range of options.
Brady® 65592 Gate Valve Lockout, Fits Min Handle Size: 5 in, Fits Max Handle Size: 6-1/2 in, 1 Padlocks, -40 deg F Min Temperature, 302 deg F Max
Gate valve lockout devices deny access and cover the valve handle. This device's unique knockout center fits OS&Y or "rising stem" valves.
BBI 451188 Partially Threaded Cap Screw, 1-8, 9-1/2 in L Under Head, 8 Grade, Alloy Steel, Plain
BBI 451188 Partially Threaded Cap Screw, 1-8, 9-1/2 in L Under Head, 8 Grade, Alloy Steel, Plain
