Duracell® DL123ABPK Cylindrical Battery, Lithium-Manganese Dioxide, 3 VDC Nominal, 1400 mAh Nominal, 123A
Duracell® DL123ABPK Cylindrical Battery, Lithium-Manganese Dioxide, 3 VDC Nominal, 1400 mAh Nominal, 123A
-
BrandDuracell®
-
UPC041333112107
-
Manufacturer Part NumberDL123ABPK
-
CountryUSA
-
Terminal TypeFlat
-
Maximum Discharge Current1000 mA
-
Chemical SystemLithium-Manganese Dioxide
-
Nominal Capacity1400 mAh
-
Nominal Voltage3 VDC
-
Shelf Life10 years
-
Battery Size123A
-
Dimensions0.669 in Dia x 1.358 in H
-
Discharge Cut-Off Voltage2.5 VDC
-
Life Hour15 hr
- -20 to 75 deg C operating temperature
- 7.18 volume
- 2.5 V at 1000 mA cut-off voltage
- 1000 mA at 2.5 VDC discharge current
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 1ANB7 |
| 830410 |
-
UNSPSC26111711
-
Standards/ApprovalsIEC|ANSI|RoHS Compliant
-
Specification Sheet
-
SDS
Recently Viewed
Duracell® DL123ABPK Cylindrical Battery, Lithium-Manganese Dioxide, 3 VDC Nominal, 1400 mAh Nominal, 123A
Duracell® DL123ABPK Cylindrical Battery, Lithium-Manganese Dioxide, 3 VDC Nominal, 1400 mAh Nominal, 123A
Milwaukee® 48-62-6031 Ground Rod Driver, 5/8 in Rod, 10 in L, For Use With SDS Plus® Rotary Hammer, Steel
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. The SDS Plus 5/8 in. x 10 in. ground rod driver is an ideal solution for driving common ground rods for electrical circuits into soft soil. Designed to drive 1/2 in. and 5/8 in. diameter temporary and permanent ground rods, the SDS Plus ground rod driver is a great tool for residential and commercial grounding applications. The SDS Plus shank allows the ground rod driver to be used in SDS Plus tools, providing an alternative to manual ground rod driving methods. The SDS Plus ground rod driver is designed to work hammer only mode.
7/8" X 6-1/2" SAE GR-8 Hex Head Capscrew
10-STEP ROLLING WAREHOUSE LADDERS-LOUGSX2410W05>
Bore (Inner Diameter): 1.25 inches (31.75 mm) Outer Diameter: 2.75 inches (69.85 mm) Width (Thickness): 0.6875 inches (17.462 mm) Sealing: 2RS1 (Synthetic rubber NBR contact seals on both sides) Clearance: Normal radial internal clearance
Campbell® T7661361 Welded Ring, 0.26 in Wire, 2-1/2 in ID, 200 lb Load, Steel, Zinc Plated
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
