Campbell® T7661361 Welded Ring, 0.26 in Wire, 2-1/2 in ID, 200 lb Load, Steel, Zinc Plated
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
-
BrandCampbell®
-
UPC020418192043
-
Manufacturer Part NumberT7661361
-
CountryUSA|Canada
-
Load Capacity200 lb
-
FinishZinc Plated
-
MaterialSteel
-
Wire Size0.26 in
-
Inside Diameter2-1/2 in
- Do not exceed the working load limit
- Do not use for overhead lifting or hoisting
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 24F965 |
-
UNSPSC31162419
-
Package DescriptionEACH
-
Catalog
Recently Viewed
Campbell® T7661361 Welded Ring, 0.26 in Wire, 2-1/2 in ID, 200 lb Load, Steel, Zinc Plated
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
1/8"-ID NO/KW JAW COUPLING HALFS-LOVL035X1/8>
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
MOLDED RUBBER HOSE AND CABLE BRIDGE-VESMRBR24>
A-331-1/2 CROSBY MATERIAL HANDLING GROUP 1/2" CLEVIS SLIP HOOKS
Working Load Limit (WLL): 9,000 lbs (4.50 Tons). Design Safety Factor: 4:1 minimum ultimate load. Material Construction: Forged alloy steel quenched and tempered. Compatible Chain: Optimized for Grade 70 transport chain. Dimensions: 1.69" throat opening width, 0.63" pin diameter, and roughly 2.75 lbs. total weight. Attachment Method: Clevis style with a quenched and tempered alloy load pin and cotter included.
Square D™ B150 Type B Rainproof Hub, 1-1/2 in, For Use With QO™/Homeline™ NEMA 3R Load Center, Safety Switch and RB Devices
Industrial Circuit Breaker Enclosures are designed to be tough, reliable and provide exceptional performance in the most grueling conditions. Provides a dead front housing for circuit breakers, molded case switches, and motor circuit protectors to prevent personnel from accidentally contacting energized parts. Designed to meet or exceed UL 50 requirements for specific environmental conditions. Allow breaker operation without removing cover. These units are UL Listed and CSA Certified. Square D equipment with “R’’ or “RB’’ suffix, designated NEMA 3R rainproof construction, utilizes bolt-on hubs listed below. “RB’’ devices will accept 3/4 in. through 2- 1/2 in. bolt-on hubs without the use of reducers. Off-center conduit thread openings and elongated mounting holes provide quick and easy adjustment to eliminate costly conduit offsets and bends. Load Center Hub, 1.50 in, rainproof, for RB devices is a conduit entry, and is used for conduit installation. This bolt-on accessory has a UL listed rating. The dimensions are 1.38 mm(H)4.44 mm(W)3.09 mm(D). This product comes with an 18 month warranty.
