DAP® 00273 Weldwood® Original Contact Cement, 1 gal Pail, Liquid Form, Tan, 0.88
DAP® 00273 Weldwood® Original Contact Cement, 1 gal Pail, Liquid Form, Tan, 0.88
-
BrandDAP®
-
UPC070798002739
-
Manufacturer Part Number00273
-
CountryUSA
-
Temperature Rating65 to 110 deg F
-
Flash Point21 deg F
-
FormLiquid
-
ColorTan
-
TypeOriginal
-
CompositionToluene, Methyl Ethyl Ketone (MEK), Light Aliphatic Solvent Naphtha, n-Heptane, Magnesium Oxide Fume
-
Container Size1 gal
-
Container TypePail
-
Applicable MaterialsMetal, Cardboard, Concrete, Fabric, Fiberboard, Leather, Paper, Plastic, Plywood and Wood
-
Coverage216 sq-ft/gal
-
SeriesWeldwood®
-
Curing Time72 hr
-
Base TypeNeoprene
-
Specific Gravity0.88
-
Odor/ScentStrong Solvent
-
Drying Time15 to 20 min
- Premium quality, brush grade, neoprene-based contact cement that meets the stringent requirements of the professional use
- Offers high heat and water resistance when dry
- Bonds with wood, metal, glass, plastic and other common materials
- Forms strong bonds on contact to eliminate the need for clamps, temporary fasteners and long set times
- Excellent water resistance
- 5 cycle freeze-thaw cycle
- High strength and initial grab make it ideal for most project
| Cross-Reference Number |
|---|
| 272345 |
-
UNSPSC31201617
-
Standards/ApprovalsMMM-A-130B
Recently Viewed
DAP® 00273 Weldwood® Original Contact Cement, 1 gal Pail, Liquid Form, Tan, 0.88
United Abrasives-SAIT 24092 Type 1 Burr Free Stationary Saw Cut-Off Wheel, 20 in Dia x 3/16 in THK, 1 in Center Hole, A36R Grit, Aluminum Oxide Abrasive
CRC® 2130 Flammable Contact Cleaner, 11 oz Aerosol Can, Liquid Form
CRC QD Contact Cleaner is suitable for cleaning sensitive electronics. As a contact cleaner it evaporates quickly, leaves no residue and is safe to use on all plastics. Use where lower flashpoint cleaners are acceptable. NSF K2 Registered.
G-TEK NYLON AND NITRILE GLOVE WITHOUT DOTS-GLV34875XL >
The United Abrasives/SAIT Stud King® Chop Saw Wheels are made for general purpose cool cutting on thin metals amd are composed of aluminum oxide grain. United Abrasives/SAIT wheels are constructed using the highest quality fiberglass to withstand the toughest applications. Proudly manufactured in the USA.
Material: Glass-coupled Polypropylene (high chemical resistance).Seal/Gasket Material: Low-Density Polyethylene (LDPE). Pressure Rating: Rated up to 150 PSI. Application: Commonly used to downsize, transition, or hook up pumps, hoses, or standard US NPT plumbing fixtures to the coarse buttress valves found on industrial chemical or water IBC totes.
