FYH® UCF205-16 4-Bolt Cylindrical Bore Normal Duty Square Flange Mount Ball Bearing Unit With Set Screw, 3/8 in Dia Bore, 2-3/4 in L Bolt Center-to-Center, 15/32 in Dia Bolt Circle
FYH® UCF205-16 4-Bolt Cylindrical Bore Normal Duty Square Flange Mount Ball Bearing Unit With Set Screw, 3/8 in Dia Bore, 2-3/4 in L Bolt Center-to-Center, 15/32 in Dia Bolt Circle
-
BrandFYH®
-
UPC808250104314
-
Manufacturer Part NumberUCF205-16
-
CountryUSA
-
Load Capacity3147 lbf Dynamic/1765 lbf Static
-
Type4-Bolt Cylindrical Bore
-
SeriesUCF
-
Bore Diameter1 in
- Four-bolt flange unit with a rigid cast iron housing and two specially designed set screws in the inner ring spaced at 120 deg for maximum holding power and reliability for a wide variety of applications and operating conditions
- 3/8 in bolt
- 15/32 in bolt hole diameter
- 2-3/4 in distance between mounting holes
- 1-1/16 in flange thickness
-
UNSPSC31171501
-
Catalog
Recently Viewed
FYH® UCF205-16 4-Bolt Cylindrical Bore Normal Duty Square Flange Mount Ball Bearing Unit With Set Screw, 3/8 in Dia Bore, 2-3/4 in L Bolt Center-to-Center, 15/32 in Dia Bolt Circle
FYH® UCF205-16 4-Bolt Cylindrical Bore Normal Duty Square Flange Mount Ball Bearing Unit With Set Screw, 3/8 in Dia Bore, 2-3/4 in L Bolt Center-to-Center, 15/32 in Dia Bolt Circle
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.
Linn 10FS32 Rough Bore Spur Gear, 10 Diametral Pitch, 14.5 deg Pressure Angle, 1 in W Face, 32 Teeth, 3.2 in Dia Pitch, 3/4 to 1-5/8 in Dia Bore, Steel
Steel spur gears in 20 to 2 Diametral Pitch - 14.5 deg pressure angle stocked. Other circular, metric or D. P. sizes made-to-order in 14.5 deg, 20 deg or other pressure angles from steel, nylon, phenolic, bronze, cast iron or other materials up to 96 in Dia Internal gears and ground external profiles may be provided subject to equipment limitations.
2-1/2 X 2-1/2 X 1-BT BLACK TEES-JPW21/2X21/2X1BT>
1/2" X 4" ZINC EYEBOLT-NTL167155 >
