Oatey® FlowGuard Gold® 31911 1-Step All Weather Low VOC Medium Body CPVC Cement, 8 oz Container, Yellow
Oatey® FlowGuard Gold® 1-Step All Weather Fast Set Yellow Cement is recommended for cold water systems and hot water systems up to 200°F / 93°C. Its prevention formula is designed to help protect pipes from corrosion. Its medium body has excellent gap filling properties and is easy to apply with included in-lid dauber. This yellow, low VOC, fast set cement can be used to solvent weld copper tube sizes (CTS) CPVC hot and cold potable water pipes and fittings up to 2 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.
-
BrandOatey®
-
UPC038753319117
-
Manufacturer Part Number31911
-
CountryUSA|Canada
-
Temperature Rating0 to 110 deg F
-
ColorYellow
-
Type1-Step All Weather Low VOC Medium Body
-
CompositionFuran, Tetrahydro, Methyl Ethyl Ketone, Ethene, Chloro-, Homopolymer, Acetone, Cyclohexanone, Silica, Amorphous, Fumed
-
Container Size8 oz
-
Curing Time1 or 6 hr
-
Setting Time4 to 5 min
-
Odor/ScentSolvent
-
Suitable For Use With2 in Dia Copper Tube/CPVC Hot and Cold Potable Water Pipe and Fittings
- Helps protect pipes from corrosion
- No primer needed where local codes permit
- Recommended application temperature 0 to 110 deg F
- FlowGuard Gold® is a registered trademark of The Lubrizol Corporation
- 1 hr Cold/6 hr hot water above 60 deg F curing
- Minimum 500 cps at 73 deg F +/- 2 deg F viscosity
- 7.98 +/- 0.2 lb/gal density
- 4 to 5 min (30 to 50 deg F)/2 to 3 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting
- NSF 61 for PW, DWV, SEWER
- For cold and hot water systems up to 200°F / 93°C
- Helps protect pipes from corrosion
- Can be used on copper tube sizes (CTS) CPVC hot and cold potable water pipes and fittings up to 2 in. diameter with interference fit
- Approved for use with FlowGuard Gold® piping systems (registered trademark of Lubrizol Corporation)
- No primer needed where local codes permit
-
UNSPSC31201617
-
Package DescriptionEACH
-
Standards/ApprovalsASTM F493|IAPMO Listed|NSF 61
-
Catalog
-
SDS
-
Specification Sheet
Recently Viewed
Oatey® FlowGuard Gold® 31911 1-Step All Weather Low VOC Medium Body CPVC Cement, 8 oz Container, Yellow
Oatey® FlowGuard Gold® 1-Step All Weather Fast Set Yellow Cement is recommended for cold water systems and hot water systems up to 200°F / 93°C. Its prevention formula is designed to help protect pipes from corrosion. Its medium body has excellent gap filling properties and is easy to apply with included in-lid dauber. This yellow, low VOC, fast set cement can be used to solvent weld copper tube sizes (CTS) CPVC hot and cold potable water pipes and fittings up to 2 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.
Dodge® Tigear-2® 17Q05L56 Standard Right Angle Worm Gear Speed Reducer, Quill Input, Solid A Shaft Output, 2.59 hp, 5:1 Gear, 350 rpm Maximum Output, 430 in-lb Torque Rating
The speed reducer shall be a single reduction worm gear reducer incorporating three input configurations - a quill style for direct attachment of electric motors, a separate keyed input shaft suitable for flexible coupling to a footed motor or belt and pulley input configuration and a motor adapter style input that employs a three piece coupling to connect electric motors to the reducer. These input configurations shall be available in both solid and hollow output shaft designs. The reducer shall be manufactured in the United States of America.
1" X 3/4" GALVANIZED ELBOW-JPW1X3/4GE >
1/8" 45 DEGREE GALVANIZED ELBOW-JPW1/8G45 >
1-1/2" -FEMALE PIPE THREAD 3000# BLACK TEE-FIT11/2BT3000 >
Browning® 3063443 Type A Arm Multiple Sheave, 7/8 to 3-1/2 in QD® Bore, 11.3 in OD, 5 Grooves, 11.2 in Dia Pitch, 3-3/4 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.





