Crescent® 39873N Rectangle Pillar File, 4 in L, Double Cut
The Crescent Nicholson pillar files is a Swiss pattern file with cuts ranging from 00 to 4. These are made to be a more exact measurements than American pattern files. Pillar files are rectangular in shape and are double cut on two sides. They feature safe edges and are tapered in thickness. Similar in shape to hand files, but only 2/3 as wide.
-
BrandCrescent®
-
UPC037103242105
-
Manufacturer Part Number39873N
-
CountryUSA|Canada
-
Coarseness of CutSwiss Pattern
-
TypeRectangle
-
Handle TypeTang
-
Cut TypeDouble
-
Length4 in
-
Length of Cut#2
- Safe edges
- Tapered in thickness
- Similar in shape to hand files but only 2/3 as wide
- Swiss pattern files, made to more exacting measurements than American Pattern Files
- Rectangular shape
- Double cut on two sides only
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 24H202 |
-
UNSPSC27111929
-
Package DescriptionEACH
-
WarrantyLimited Lifetime
-
Owners/User Manual
-
Catalog
Recently Viewed
The Crescent Nicholson pillar files is a Swiss pattern file with cuts ranging from 00 to 4. These are made to be a more exact measurements than American pattern files. Pillar files are rectangular in shape and are double cut on two sides. They feature safe edges and are tapered in thickness. Similar in shape to hand files, but only 2/3 as wide.
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Milwaukee® HOLE DOZER™ 49-56-0717 Hole Saw, 1-3/4 in Dia, 1.62 in D Cutting, Carbide Cutting Edge, 5/8-18 Arbor
The MILWAUKEE® 1-3/4" HOLE DOZER™ with Carbide Teeth Hole Saw features a new 3 TPI design that offers fast cuts with the durability of a bi-metal hole saw and life of a carbide hole saw. This Milwaukee hole saw provides the longest life in general purpose and extreme materials with the ability to cut through stainless steel, cast iron, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles, and more with ease. Deep gullets clear material fast while cutting, and Milwaukee's ALL-ACCESS SLOTS solve the frustration of plug removal for more productivity with less downtime between holes. The new slot design also provides increased pilot visibility for accurate placement and faster chip ejection keeping cuts cool. The HOLE DOZER™ with Carbide Teeth Hole Saw has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Milwaukee HOLE DOZER™ with Carbide Teeth Hole Saws are proudly made in the USA.
Morse® 131261 MHSTK Hole Saw, 1-5/8 in Dia, 1-15/16 in D Cutting, Carbide Cutting Edge, 5/8 to 18 Arbor
DURABLE POLAR COOLER FEATURING AN ULTRATHERM INSULATED BODY AND LID. REINFORCED SWING UP HANDLES WITH TIE-DOWN LOOP FEATURE. DUAL SNAP FIT LATCHES. THREADED DRAIN PLUG. STAIN AND ODOR RESISTANT LINER. CHILD SAFETY LATCH. 188 CAN CAPACITY
-JWH826634 >
2 45-D 3000# BLACK ELBOW
