Crescent® 02228B Round Chain Saw File, 8 in L, Double/Smooth Cut
Crescent® 02228B Round Chain Saw File, 8 in L, Double/Smooth Cut
-
BrandCrescent®
-
UPC037103232953
-
Manufacturer Part Number02228B
-
CountryUSA|Canada
-
Thickness5/32 in
-
Coarseness of CutAmerican Pattern
-
TypeRound
-
Handle TypeTang
-
Width5/32 in
-
Cut TypeDouble/Smooth
-
Length8 in
- Tighten tension on chain to firmly support cutters when filing
- Place file against beveled cutting surface of teeth 20 to 45 deg with saw
- File from inside to outside of cutter
- Sharpen all left hand cutters on one side of chain and move to the other side and file all the right hand cutters
- Sharpen all left hand cutters on one side of chain
- Check depth gauge height every 2 or 3 sharpening
- Height between cutting teeth and depth gauge is between 0.02 to 0.03 in
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 4PKE6 |
| MSC | 77485357 |
-
UNSPSC27111923
-
Package Description3/BG
-
WarrantyLimited Lifetime
-
Catalog
-
Owners/User Manual
Recently Viewed
Crescent® 02228B Round Chain Saw File, 8 in L, Double/Smooth Cut
DuMONT Minute Man® replacement shims for use with Keyway Broaches are available for spares and to replace lost or damaged shims. The smallest Broaches cut in one pass and require no shim. Multiple pass Keyway Broaches are furnished with all necessary shims unless otherwise noted. Progressive shims may be purchased for use with our largest Keyway Broaches. A shim is required to compensate for the thickness removed following a Keyway Broach's cutting pass. The addition of a shim serves to move the Broach forward towards its standard finished cutting depth. Subsequent passes require the stacking of shims. Replacement or extra shims are provided in shim sets corresponding to the Broach size and letter designation in the quantity necessary to cut to standard depth. Please specify EDP number when ordering replacement or extra shims.
Crosby® 1031939 HG-227-1/2X6 Turnbuckle, Jaw/Eye, 1/2 in Thread, 2200 lb Working, 6 in Take Up, 14.48 in L Close, Steel
Crosby® 1031939 HG-227 Turnbuckle, Jaw/Eye, 1/2 in Thread, 2200 lb Working, 6 in Take Up, 14.48 in L Close, Steel
MORSE® 59315 5961 Center Cutting Regular Length Single End End Mill, 3.5 mm Dia Cutter, 12 mm Length of Cut, 4 Flutes, 4 mm Dia Shank, 51 mm OAL, Bright
A superior, lead-free industrial coating formulated for maintenance operations where maximum performance is required. This high solids paint does not run or sag and gives twice the coverage of conventional aerosol enamels. A rust proof industrial primer formulated specifically for use with MRO® industrial protective coatings. This high solids paint gives twice the coverage of conventional aerosol primers. Heat resistant, VOC compliant and fast drying.
United Abrasives-SAIT 80000 Coated Shop Roll, 25 yd L x 1-1/2 in W, 120 Grit, Fine Grade, Aluminum Oxide Abrasive, Cloth Backing

