CGW® 70125 Coated Abrasive Flap Disc, 4-1/2 in Dia, 320 Grit, Very Fine Grade, Silicon Carbide Abrasive, Type 29 Conical Disc
CGW® 70125 Coated Abrasive Flap Disc, 4-1/2 in Dia, 320 Grit, Very Fine Grade, Silicon Carbide Abrasive, Type 29 Conical Disc
-
BrandCGW®
-
UPC655332701257
-
Manufacturer Part Number70125
-
CountryUSA
-
Maximum Speed13300 rpm
-
ColorBlue
-
GradeVery Fine
-
Grit320
-
Abrasive MaterialSilicon Carbide
-
Backing MaterialNon-Woven
-
Disc Diameter4-1/2 in
-
Disc TypeType 29 Conical
- Premium surface conditioning material for surface preparation
- Three different grits for blending, deburring and cleaning
- For working on contoured and edge work
- Flaps are angled at 8 deg for greater surface contact and aggressive use
- Best used at 15 to 25 deg angle
| Competitor Name | Cross-Reference Number |
|---|---|
| Berkshire eSupply | MG9070125 |
-
UNSPSC31191506
-
Package Description10/BX
-
Specification Sheet
Recently Viewed
CGW® 70125 Coated Abrasive Flap Disc, 4-1/2 in Dia, 320 Grit, Very Fine Grade, Silicon Carbide Abrasive, Type 29 Conical Disc
CGW® 70125 Coated Abrasive Flap Disc, 4-1/2 in Dia, 320 Grit, Very Fine Grade, Silicon Carbide Abrasive, Type 29 Conical Disc
The Mag-Torch® MT 579 is a high performance silver swirl MAP-Pro™ torch that delivers an extreme swirl flame, it has an on demand trigger giving you instant ignition and flame shut off. This torch has a safety trigger lock to prevent unwanted ignition and it also has a trigger lock for continuous flame setting. This torch can solder upto 2 in of copper.
Browning® 1296391 Automatic Torque Limiter, 1 in Straight Bore, 3-1/2 in OD, 1800 in-lb (1 Spring)/3000 in-lb (2 Spring) Torque
Browning® torque limiters are torque control devices that slip under excessive load but automatically carry the desired load after the excess has been removed. The device can be easily adjusted to slip at a desired overload and automatically re-engage when overload is removed. Overload should be removed promptly since prolonged slippage can be detrimental to the friction disc. Generally, no resetting is required after the torque limiter has slipped. Torque limiters help prevent machine and product damage and costly downtime caused by shock loads, overloads or machine jams but should not be used as clutches.
2" BUNA-N CAM & GROOVE GASKETS-DXN200GTHK >
Jacobs® 30343 Chuck Service Kit, For Use With 8-1/2N Model Chucks
MORSE® 58228 5942 Ball Nose Center Cutting Regular Length Single End End Mill, 7/16 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 7/16 in Dia Shank, 2-3/4 in OAL, Bright
