SAIT 4" X 21" 100-GRIT A/O SANDING BELT SAI 57606
United Abrasives-SAIT 1AX Blue Line™ 57606 Semi-Friable Coated Abrasive Belt, 4 in W x 21 in L, 100 Grit, Aluminum Oxide Abrasive, Cotton Backing
-
BrandUnited Abrasives-SAIT
-
UPC699053576060
-
Manufacturer Part Number57606
-
CountryUSA
-
TypeSemi-Friable
-
Grit100
-
Abrasive MaterialAluminum Oxide
-
Applicable MaterialsAluminum, Metal, Stainless, Wood, Alloyed Steel, Cast Iron, Ferrous and Non-Ferrous Metals
-
SeriesBlue Line™ 1AX
-
Backing MaterialCotton
-
Backing WeightX-Weight
-
Belt Length21 in
-
Belt Width4 in
- Specially designed boxes lend themselves to being displayed either on pegboard hooks or shelving
-
UNSPSC31191507
-
Package Description10/BX
-
SDS
Recently Viewed
United Abrasives-SAIT 1AX Blue Line™ 57606 Semi-Friable Coated Abrasive Belt, 4 in W x 21 in L, 100 Grit, Aluminum Oxide Abrasive, Cotton Backing
The Crescent Nicholson pillar files is a Swiss pattern file with cuts ranging from 00 to 4. These are made to be a more exact measurements than American pattern files. Pillar files are rectangular in shape and are double cut on two sides. They feature safe edges and are tapered in thickness. Similar in shape to hand files, but only 2/3 as wide.
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Milwaukee® HOLE DOZER™ 49-56-0717 Hole Saw, 1-3/4 in Dia, 1.62 in D Cutting, Carbide Cutting Edge, 5/8-18 Arbor
The MILWAUKEE® 1-3/4" HOLE DOZER™ with Carbide Teeth Hole Saw features a new 3 TPI design that offers fast cuts with the durability of a bi-metal hole saw and life of a carbide hole saw. This Milwaukee hole saw provides the longest life in general purpose and extreme materials with the ability to cut through stainless steel, cast iron, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles, and more with ease. Deep gullets clear material fast while cutting, and Milwaukee's ALL-ACCESS SLOTS solve the frustration of plug removal for more productivity with less downtime between holes. The new slot design also provides increased pilot visibility for accurate placement and faster chip ejection keeping cuts cool. The HOLE DOZER™ with Carbide Teeth Hole Saw has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Milwaukee HOLE DOZER™ with Carbide Teeth Hole Saws are proudly made in the USA.
Morse® 131261 MHSTK Hole Saw, 1-5/8 in Dia, 1-15/16 in D Cutting, Carbide Cutting Edge, 5/8 to 18 Arbor
DURABLE POLAR COOLER FEATURING AN ULTRATHERM INSULATED BODY AND LID. REINFORCED SWING UP HANDLES WITH TIE-DOWN LOOP FEATURE. DUAL SNAP FIT LATCHES. THREADED DRAIN PLUG. STAIN AND ODOR RESISTANT LINER. CHILD SAFETY LATCH. 188 CAN CAPACITY
-JWH826634 >
