Dremel® 8175 Grinding Stone, Cylindrical Point, 9.5 mm Dia, 3.2 mm Dia Shank
Dremel® 8175 Grinding Stone, Cylindrical Point, 9.5 mm Dia, 3.2 mm Dia Shank
-
BrandDremel®
-
Manufacturer Part Number8175
-
CountryUSA
-
Maximum Speed25000 rpm
-
Abrasive MaterialAluminum Oxide
-
Head Diameter9.5 mm
-
Shank Diameter3.2 mm
Recently Viewed
Dremel® 8175 Grinding Stone, Cylindrical Point, 9.5 mm Dia, 3.2 mm Dia Shank
Drillco 172F14010 1720 Imperial Masonry Drill, 5/8 in Drill Bit, SDS-Plus Shank, 8 in D Cutting, Carbide Cutting Edge, 10-1/4 in OAL
SDS Plus. 4x90 head geometry prevents locking when hitting rebar on the side. Bit is designed for longer life when drilling in concrete. As an additional benefit, it can crush through and pulverize rebar when drilling in reinforced concrete applications.
Irwin® 5026016 Rotary Masonry Drill, 1/2 in Drill Bit, Round Shank, Tungsten Carbide Cutting Edge, 13 in OAL
Tungsten carbide tip is durable when drilling in concrete and brick. Deep single flute removes dust fast for increased drilling speed and longer bit life. Diamond ground tip has aggressive cutting angles for increased drilling speed. Fits all hammer drills with 3-jaw or Jacobs chuck.
Milwaukee® MX4™ 48-20-7210 4-Cutter Heavy Duty Rotary Hammer Drill Bit, 3/4 in Drill Bit, 6 in D Cutting, Carbide Cutting Edge, 8 in OAL
The MILWAUKEE® SDS Plus 4-Cutter MX4™ 3/4" X 6" X 8" Drill Bits with solid head carbide deliver up to 5X longer life in concrete with rebar. Engineered with rebar guards to provide maximum durability in hard aggregate and rebar with a 4-cutter design that prevents lock-up, reducing downtime. The sharp centering tip offers exact spot drilling in concrete and metal decking. Variable flutes remove dust faster, reducing heat and delivering up to 20% more holes per battery charge. A wear mark indicator shows end of life and when bit no longer meets the ANSI requirement. The Milwaukee MX4™ 4-Cutter Drill Bits are ideal for concrete with rebar and masonry applications.
ITM 717SP1212 Rotary Hammer Drill Bit, 5 in Drill Bit, 1/2 in Shank Spline Shank, 11 in OAL
ITM 717SP1212 Rotary Hammer Drill Bit, 5 in Drill Bit, 1/2 in Shank Spline Shank, 11 in OAL
Irwin® 326014 Percussion Rotary Hammer Drill Bit, 7/16 in Drill Bit, 7/16 in Straight Shank, 4 in D Cutting, Carbide Cutting Edge, 6 in OAL
Irwin® 326014 Percussion Rotary Hammer Drill Bit, 7/16 in Drill Bit, 7/16 in Straight Shank, 4 in D Cutting, Carbide Cutting Edge, 6 in OAL
