CW-2-1/4 2-1/4" 12-point Chrome Combination Wrench
2-1/4" 12-POINT CHROME COMBINATION WRENCH - TABCW21/4>
Recently Viewed
CW-2-1/4 2-1/4" 12-point Chrome Combination Wrench
2-1/4" 12-POINT CHROME COMBINATION WRENCH - TABCW21/4>
MORSE® 17201 2330 1-Stage Type J Heavy Duty Jobber Length Aircraft Drill, 23/64 in Drill - Fraction, 0.3594 in Drill - Decimal Inch, 135 deg Point, Cobalt
Milwaukee® M12™ 48-20-7441 2-Cutter Rotary Hammer Drill Bit, 5/16 in Drill Bit, 25/64 in SDS-Plus Shank, 4 in D Cutting, Carbide Cutting Edge, 6 in OAL
Milwaukee® M/2™ 2-cutter SDS Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ 2-cutter features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.
59-MM-ID X 65-MM-OD BUNA-N O-RINGS-CUSH3X59>
Porter-Cable® 42024 template guides are a great way to guide a router for a very controlled cut using a pattern or template. The guide attaches to the router base to keep the bit a specific distance from the template's edge while allowing the bit to cut in where needed.
Milwaukee® 48-20-5060 Heavy Duty Thin Wall Core Bit, 5 in Drill - Fraction, 5 in Drill - Decimal Inch, Carbide
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6162 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.

