DRILLCO 7C116ADC 7000C Abrasive Disc With Tap, Radius End, Cylindrical Head, 1/4 in Dia Head, 5/8 in L of Cut, Double Cut
Drillco solid carbide burrs are extremely versatile. Manufactured from premium grade tungsten carbide. Burrs are available in standard lengths (single and double cut), 6" long series, and in miniature sizes (for use in pencil grinders).
-
BrandDrillco
-
UPC045997294841
-
Manufacturer Part Number7C116ADC
-
CountryUSA|Canada
-
Maximum Speed50000 rpm
-
Head Diameter1/4 in
-
Head MaterialSolid Carbide
-
Head ShapeCylindrical
-
Applicable MaterialsAluminum, Brass, Cast Iron, Copper, Magnesium Plastics, Steel and Stainless Steel
-
Series7000C
-
Cut TypeDouble
-
Shank Diameter1/4 in
-
Industry SpecificationSC-1
-
End TypeRadius
-
Length of Cut5/8 in
- Double cut tooth design for aggressive material removal
- Optimal flute geometry for fast removal and fine finish
- Brazed shank for perfect concentricity and reduced vibrations
- The double cut design also produces an easy to handle granular type chip, in most metals, as opposed to the conventional sliver type chips
- Throughout it's life, the double cut gives faster stock removal, less operator fatigue, and maintains a good finish on the widest possible variety of materials
- Double cut tooth design for aggressive material removal
- Optimal flute geometry for fast removal and fine finish
- Brazed shank for perfect concentricity and reduced vibrations
-
UNSPSC23251706
-
Package Description1/PK
-
Standards/ApprovalsPROP65: This product can expose you to chemicals including Cobalt, which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
-
SDS
-
Catalog
Recently Viewed
DRILLCO 7C116ADC 7000C Abrasive Disc With Tap, Radius End, Cylindrical Head, 1/4 in Dia Head, 5/8 in L of Cut, Double Cut
Drillco solid carbide burrs are extremely versatile. Manufactured from premium grade tungsten carbide. Burrs are available in standard lengths (single and double cut), 6" long series, and in miniature sizes (for use in pencil grinders).
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
3-PC 1" KNOCKOUT SEALS-ELEKOS100>
FUEL FILTER-WIX33389>
1" SERVICE ENTRANCE SLB ELBOW-ELEL902 >
WINTER FRESH AIR DISPENSER REFILL-MIS20912WF >
