MORSE C/Tool 1/4" SK-1 DBL/CUT CARBIDE BURRS MCT 59800
MORSE® Edge Hog® 59800 5970 Premium Carbide Burr, Cone Head, 1/4 in Dia Head, 1/8 in L of Cut, Double Cut
-
BrandMORSE®
-
UPC686125598006
-
Manufacturer Part Number59800
-
CountryUSA
-
Maximum Speed50000 rpm
-
TypePremium
-
Head CoatingBright
-
Head Diameter1/4 in
-
Head MaterialSolid Carbide
-
Head ShapeCone
-
Applicable MaterialsBrass, Cast Iron and Copper
-
Series5970
-
Cut TypeDouble
-
Shank Diameter1/4 in
-
Included Angle90 deg
-
Industry SpecificationSK-1
-
Length of Cut1/8 in
- Design reduces the pulling action, reduces size of chips
-
UNSPSC23251706
-
Package Description1/PK
-
Standards/ApprovalsPROP65: This product contains a chemical known to the State of California to cause cancer or Birth defects. For more information go to www.P65Warnings.ca.gov
-
Catalog
Recently Viewed
MORSE® Edge Hog® 59800 5970 Premium Carbide Burr, Cone Head, 1/4 in Dia Head, 1/8 in L of Cut, Double Cut
Browning® 1046093 VP Series Type 5 Variable Pitch Sheave, 1-3/8 in Finished Bore, 5.95 in OD, 2 Grooves, 4.4 to 5.4 in (A/4L)/4.7 to 5.9 in (B/5L/5V) Dia Pitch, 1-5/8 to 2-3/8 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
NIBCO® 829-167 Reducing Coupling, 1-1/4 x 3/4 in Nominal, Slip End Style, SCH 80/XH, PVC, Fluorocarbon Elastomer Seal, Domestic
Jacobs® Multi-Craft® 30247D Drill Chuck, 0.062 to 0.375 in Capacity, 3/8-24 Mounting, Plain Bearing, KG1 Key
The Multi-Craft® drill chuck is mounted as original equipment on more drills than any other chuck by both domestic and import drill manufacturers.
26-T H-PITCH TIMING BELT SHEAVE-TBW26H100>
Osborn 0001125100 Small Diameter Wheel Brush, 1-1/2 in Dia Brush, 7/32 in W Face, 0.005 in Dia Crimped Filament/Wire, 3/8 in Arbor Hole
Osborn 11251 Small Diameter Wheel Brush, 1-1/2 in Dia Brush, 7/32 in W Face, 0.005 in Dia Crimped Filament/Wire, 3/8 in Arbor Hole
