DRILLCO 7D116ADC 7000D Carbide Burr, Ball Head, 1/4 in Dia Head, 1/4 in L of Cut, Double Cut
Drillco solid carbide burrs are extremely versatile. Manufactured from premium grade tungsten carbide. Burrs are available in standard lengths (single and double cut), 6" long series, and in miniature sizes (for use in pencil grinders).
-
BrandDrillco
-
UPC045997295275
-
Manufacturer Part Number7D116ADC
-
CountryUSA|Canada
-
Maximum Speed50000 rpm
-
Head Diameter1/4 in
-
Head MaterialSolid Carbide
-
Head ShapeBall
-
Applicable MaterialsAluminum, Brass, Cast Iron, Copper, Magnesium Plastics, Steel and Stainless Steel
-
Series7000D
-
Cut TypeDouble
-
Shank Diameter1/4 in
-
Industry SpecificationSD-1
-
Length of Cut1/4 in
- Double cut tooth design for aggressive material removal
- Optimal flute geometry for fast removal and fine finish
- Brazed shank for perfect concentricity and reduced vibrations
- The double cut design also produces an easy to handle granular type chip, in most metals, as opposed to the conventional sliver type chips
- Throughout it's life, the double cut gives faster stock removal, less operator fatigue, and maintains a good finish on the widest possible variety of materials
- Double cut tooth design for aggressive material removal
- Optimal flute geometry for fast removal and fine finish
- Brazed shank for perfect concentricity and reduced vibrations
-
UNSPSC23251706
-
Package Description1/PK
-
Standards/ApprovalsPROP65: This product can expose you to chemicals including Cobalt, which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
-
SDS
-
Catalog
Recently Viewed
DRILLCO 7D116ADC 7000D Carbide Burr, Ball Head, 1/4 in Dia Head, 1/4 in L of Cut, Double Cut
Drillco solid carbide burrs are extremely versatile. Manufactured from premium grade tungsten carbide. Burrs are available in standard lengths (single and double cut), 6" long series, and in miniature sizes (for use in pencil grinders).
Morse® 131889 MHSTK Hole Saw, 5-1/2 in Dia, 1-15/16 in D Cutting, Carbide Cutting Edge, 5/8 to 18 Arbor
7/8"-ID LOW PILLOW BLOCK UNITS-MBUVPLS214>
Dichtomatik 75115253 O-Ring, 243 Dash Number, 4.109 in ID x 4.387 in OD, PTFE, 55 Durometer, Import, Custom 243-TEFLON
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
MORSE® 44256 4553 Center Cutting Double End Regular Length End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4-1/8 in OAL, Bright
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.

