Dichtomatik N70458 O-Ring, 458 Dash Number, 14.475 in ID x 15.025 in OD, Nitrile Rubber, 70 Shore A Durometer, Import, Custom 458
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
-
BrandDichtomatik
-
Manufacturer Part NumberN70458
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialNitrile Rubber
-
ColorBlack
-
Inside Diameter14.475 in
-
Domestic/ImportImport
-
Durometer70 Shore A
-
Outside Diameter15.025 in
- Good chemical resistance to mineral oils and greases
- The physical and chemical resistance properties of NBR materials are determined by the acrylonitrile (ACN) content of the base polymer which can vary between 18 and 50%
- Low ACN content ensures good flexibility at low temperatures, but offers limited resistance to oils and fuels
- As the ACN content increases, the low temperature flexibility reduces and the resistance to oils and fuels improves
- Physical and chemical resistance properties of NBR materials are also affected by the cure system of the polymer
- Peroxide cured materials have improved physical properties, chemical resistance and thermal properties as compared to sulfur-donor-cured materials
- Standard grades of NBR are typically resistant to mineral oil-based lubricants and greases, many grades of hydraulic fluids, aliphatic hydrocarbons, silicone oils and greases and water to about 80 deg C
- NBR is generally not resistant to aromatic and chlorinated hydrocarbons, fuels with a high aromatic content, polar solvents, glycol based brake fluids and non-flammable hydraulic fluids (HFD)
- NBR also has low resistance to ozone, weathering and aging, but in many applications this has no negative effect
-
UNSPSC31401503
-
Standards/ApprovalsDNV Approved|FDA Compliant|ISD Certified|NFPA Listed|PTDA Certified
Recently Viewed
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Krylon K01618777 Spray Paint Heat Paint, 12 oz Container, Liquid Form, Black, 20 sq-ft Coverage
COMPOUND NATURAL RUBBER/SBR CORE: POLYESTER, COVER; COTTON/POLYESTER BLEND. FRACTIONAL HORSEPOWER V-BELT. CRAFTED FOR DURABLE PERFORMANCE IN HUMID ENVIRONMENTS. REINFORCED RUBBER CONSTRUCTION IS BUILT TO LAST.
-JAS5L350>
5/16" DIAMETERX1" SOCKET HEAD CAP SCREWS-HOL72128 >
OUTRIGGER HANDLE BRACE FOR PUSH BROOMS - DQB11091 >
This kit is specially designed for automotive clean up work. The kit includes one each of the following: 49-90-0060 10 foot Vinyl Hose, 49-90-0400 15 in Crevice Tool, 49-90-0740 Utility Nozzle. Hose is 1-/12 in ID With complimentary attachments.
