MORSE C/Tool 1/4" SJ-1 DBL/CUT CARBIDE BURRS MCT 59793
MORSE® 59793 5970 Premium Wheel Brush, Cone Head, 1/4 in Dia Head, 3/16 in L of Cut, Double Cut
-
BrandMORSE®
-
UPC686125597931
-
Manufacturer Part Number59793
-
CountryUSA
-
Maximum Speed50000 rpm
-
TypePremium
-
Head CoatingBright
-
Head Diameter1/4 in
-
Head MaterialSolid Carbide
-
Head ShapeCone
-
Applicable MaterialsBrass, Cast Iron and Copper
-
Series5970
-
Cut TypeDouble
-
Shank Diameter1/4 in
-
Included Angle60 deg
-
Industry SpecificationSJ-1
-
Length of Cut3/16 in
- Design reduces the pulling action, reduces size of chips
-
UNSPSC23251706
-
Package Description1/PK
-
Standards/ApprovalsPROP65: This product contains a chemical known to the State of California to cause cancer or Birth defects. For more information go to www.P65Warnings.ca.gov
-
Catalog
Recently Viewed
MORSE® 59793 5970 Premium Wheel Brush, Cone Head, 1/4 in Dia Head, 3/16 in L of Cut, Double Cut
72 LANYARDS WITH SHOCK ABSORBERS-FRE452A6 >
BBI 847532 Partially Threaded Cap Screw, 3/4-10, 6 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
BBI 847532 Partially Threaded Cap Screw, 3/4-10, 6 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
The Starrett 178 Series Fillet or Radius Inch Reading Gages are very useful for tool and diemakers, machinists, screw machine operators, patternmakers and other mechanics to lay out and check radii of tools, dies, patterns, and more. 30 Leaves, 1/32-1/4" Range, 64ths increments.
BBI 847476 Partially Threaded Cap Screw, 5/8-18, 3 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
BBI 847476 Partially Threaded Cap Screw, 5/8-18, 3 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
