Browning 2-15/16"-ID 4-B TRB PILLOW BLOCKS BRW PBE-920-F X 2-15/16
Browning® E920 series mounted tapered roller bearings feature durable 1-piece non-expansion housings with Type E mounting dimensions and limited misalignment. The E920 series contains setscrew locking collars for easy installation. It also contains a contact face riding seal in order to provide a good balance between contaminant entry, grease retention and friction. Depending on your application requirements, these bearings are available in a wide variety of bore sizes and housing configurations.
-
BrandBrowning®
-
UPC662289586646
-
Manufacturer Part Number730051
-
CountryUSA
-
Load Capacity9630 lb Dynamic
-
Locking DeviceDouble Set Screw Collar
-
Temperature Rating-20 to 200 deg F
-
FinishGray Painted
-
MaterialCast Iron
-
Maximum Speed1000 rpm
-
TypeHeavy Duty Type SR
-
Mounting TypeFour-Bolt Base
-
Seal TypeContact
-
SeriesPBE920
-
Base Width4 in
-
Base to Bore Centerline3-1/8 in
-
Bolt Center-to-Center Length8 to 9-7/8 in
-
Bore Diameter2-15/16 in
-
Bore TypeRound/Tapered
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height6-1/4 in
-
Overall Length12 in
-
Overall Width4-1/2 in
- Heavy duty tapered roller bearings with steel cage for radial, thrust and combined loading
- Single lip contact face-riding seals rotate with the shaft
- Double-collar interlock with 120 deg spacing setscrew lock, diamond faceted setscrews
- Powder coat epoxy 2-bolt cast iron housing
- Heavy duty tapered roller bearings with steel cage for radial, thrust and combined loading_x005f Single lip contact face-riding seals rotate with the shaft_x005f Double-collar interlock with 120 deg spacing setscrew lock, diamond faceted setscrews_x005f Powder coat epoxy 2-bolt cast iron housing
-
Alternative Part NumberPBE920FX 2 15/16
-
UNSPSC31171511
-
Package DescriptionEACH
-
Standards/ApprovalsAMBA Standard
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Browning 2-15/16"-ID 4-B TRB PILLOW BLOCKS BRW PBE-920-F X 2-15/16
Browning® E920 series mounted tapered roller bearings feature durable 1-piece non-expansion housings with Type E mounting dimensions and limited misalignment. The E920 series contains setscrew locking collars for easy installation. It also contains a contact face riding seal in order to provide a good balance between contaminant entry, grease retention and friction. Depending on your application requirements, these bearings are available in a wide variety of bore sizes and housing configurations.
500-A-2X1-1/4 EMERSON POWER TRANSMISSION
1-1/4"-ID TORQUE LIMITER - MRE500A2X11/4>
Gatorade 04702 G Series Dry Mix Powder Sticks, 1.23 oz Pack, 20 oz Yield, Powder Form, Fruit Punch
Gatorade 04702 G Series Dry Mix Powder Sticks, 1.23 oz Pack, 20 oz Yield, Powder Form, Fruit Punch
1-1/4" PVC S-80 TU BALL CHECK VALVE-NIB1210012 >
Browning® 1072933 Weld-On Hub, 1-3/4 in OAL, Sintered Steel/Malleable Iron/Ductile Iron
Browning® 1072933 Weld-On Hub, 1-3/4 in OAL, Sintered Steel/Malleable Iron/Ductile Iron
MORSE® 91410 1330G General Purpose Jobber Length Drill Bit, #29 Drill - Wire, 0.136 in Drill - Decimal Inch, 118 deg Point, HSS, TiN Coated
