Mandrels & Spindles
ARCâ„¢ 50330 Mandrel, 1/4 in Shank, 8 in OAL, For Use With Eyelet
Dremel® 401 Mandrel, 0.125 in Shank, 1.5 in OAL, For Use With Dremel 414, 422 and 429
Dremel® 401 Mandrel, 0.125 in Shank, 1.5 in OAL, For Use With Dremel 414, 422 and 429
Dremel® 402 Mandrel, 1/8 in Shank, 2-3/4 in OAL, For Use With Dremel® 409, 411, 412, 413, 420, 423, 425, 426, 456, 511, 512, 540 and 541 Polishing Bits, Cut-Off Wheel
Dremel® 402 Mandrel, 1/8 in Shank, 2-3/4 in OAL, For Use With Dremel® 409, 411, 412, 413, 420, 423, 425, 426, 456, 511, 512, 540 and 541 Polishing Bits, Cut-Off Wheel
Dremel® EZ402 Lock Mandrel, 3.2 mm Shank, 11 mm OAL
Weiler® 07766 Drive Mandrel, 4 in OAL, For Use With 2 in, 3 in Dia Bob Cat Mini Flap Disc
Weiler® 07766 Tool Drive Mandrel
Recently Viewed
Milwaukee® 48-20-5160 Heavy Duty Thick Wall Core Bit, 5 in Drill - Fraction, 5 in Drill - Decimal Inch
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) Spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5175 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.
D-259-4 TOOL REPLACEMENT SPRINGS-KLE575>
Proto® TorquePlus™ J1213MASD Anti-Slip Design Combination Wrench, 13 mm Wrench, 12 Points, 15 deg Offset, 7 in OAL, Alloy Steel, Satin, ASME B107.100, ANSI B107.9
Proto® TorquePlus™ J1213MASD Anti-Slip Design Combination Wrench, 13 mm Wrench, 12 Points, 15 deg Offset, 7 in OAL, Alloy Steel, Satin, ASME B107.100, ANSI B107.9
5/32" LONG TAPER DRIFT PUNCH - ALL25632 >
DeWALT® DCD708C2 ATOMIC Brushless Cordless Compact Drill/Driver Kit, 1/2 in Chuck, 20 V DC, 0 to 450/0 to 1650 rpm No-Load, 6.3 in OAL, Li-Ion Battery
This brushless compact drill/driver kit includes two 20V MAX* lithium-ion batteries, charger and carrying bag. It is only 6.3 in front to back and its high performance brushless motor delivers 340 unit watts outs (UWO). The LED provides optimum illumination in dark spaces. The handle is ergonomically designed for increased comfort, balance and easier Tool Controlâ„¢. It also has a removable belt hook. It's backed by a 3-year, limited warranty so you can buy with confidence.
ITM SP02506 Bit Screwdriver, #6 Point, 1 in OAL
