Mandrels & Spindles
Weiler® 07766 Drive Mandrel, 4 in OAL, For Use With 2 in, 3 in Dia Bob Cat Mini Flap Disc
Weiler® 07766 Tool Drive Mandrel
Dremel® EZ402 Lock Mandrel, 3.2 mm Shank, 11 mm OAL
Dremel® 402 Mandrel, 1/8 in Shank, 2-3/4 in OAL, For Use With Dremel® 409, 411, 412, 413, 420, 423, 425, 426, 456, 511, 512, 540 and 541 Polishing Bits, Cut-Off Wheel
Dremel® 402 Mandrel, 1/8 in Shank, 2-3/4 in OAL, For Use With Dremel® 409, 411, 412, 413, 420, 423, 425, 426, 456, 511, 512, 540 and 541 Polishing Bits, Cut-Off Wheel
Dremel® 401 Mandrel, 0.125 in Shank, 1.5 in OAL, For Use With Dremel 414, 422 and 429
Dremel® 401 Mandrel, 0.125 in Shank, 1.5 in OAL, For Use With Dremel 414, 422 and 429
ARC™ 50330 Mandrel, 1/4 in Shank, 8 in OAL, For Use With Eyelet
Recently Viewed
CW-1-1/8 1-1/8" 12-pt Chrome Combination
1-1/8" 12-PT CHROME COMBINATION WRENCH-TABCW118 >
GEARWRENCH® 82306 Punch and Chisel Set, Center/Cold/Long Taper/Pin/Starting Style, 1/4 to 1 in Chisel, 15/16 to 3/8 in Punch, 19 Punches, 8 Chisels, 27 Pieces
The GEARWRENCH 27-piece punch and chisel set includes: 8 cold chisels, 3 center punches, 6 pin punches, 4 long taper (drift) punches, 6 starter punches, and a cloth tool roll for storage. Use these cold chisels for cutting metal rivets, bolts, and nuts. Use the pin punch to drive out pins and rivets during final removal. The center punch is used for marking center lines, and pilot drill locations, while long taper punches are used to install and remove pins and shafts and to align holes. Use starter punches for both starting and installing pins and rivets.
Armstrong® 25-014 Open End Regular Length Combination Wrench, 7/16 in, 6 Points, 15 deg Offset, 5.8 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Armstrong® 25-014 Open End Regular Length Combination Wrench, 7/16 in, 6 Points, 15 deg Offset, 5.8 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
1-1/16" 6-PT 3/8" -DRIVE DEEP UNIVERSAL IMPACT-GRY1022UD >
CW-1-7/16 1-7/16" 12-pt Chrome Combination
1-7/16" 12-PT CHROME COMBINATION WRENCH-TABCW1716 >
ILSCO® NIMBUS® PBT-350 Type PBT 2-Port 2-Wire Dual Rated Insulated Splicer/Reducer Connector, Aluminum/Copper Conductor, Aluminum
ILSCO® NIMBUS® PBT-350 Type PBT 2-Port 2-Wire Dual Rated Insulated Splicer/Reducer Connector, Aluminum/Copper Conductor, Aluminum
