Weiler® 14301 Stem Mounted Utility Cup Brush, 1-3/4 in Dia Brush, 0.0118 in Dia Filament/Wire, Crimped, Steel Fill
Weiler® 14301 Stem Mounted Utility Cup Brush, 1-3/4 in Dia Brush, 0.0118 in Dia Filament/Wire, Crimped, Steel Fill
-
BrandWeiler®
-
UPC012382143015
-
Manufacturer Part Number14301
-
CountryUSA|Canada
-
Filament/Wire Diameter0.0118 in
-
Filament/Wire TypeCrimped
-
Fill MaterialSteel
-
Maximum Speed13000 rpm
-
Trim Length3/4 in
-
TypeStem Mounted Utility
-
Shank Diameter1/4 in
-
Brush Diameter1-3/4 in
- For Light to Medium Duty, General Purpose Applications
- Smaller diameter cup brushes which provide flexible brushing action and consistent performance for more demanding light duty cleaning applications
- 1/4 in stem for use on air tools
- For light to medium duty, general purpose applications
- Suitable for right angle grinder tool usage
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 5138-14301 |
-
UNSPSC27111907
-
Package Description10/PK
-
Standards/ApprovalsANSI B165.1|CSA Approved
-
Catalog
Recently Viewed
Weiler® 14301 Stem Mounted Utility Cup Brush, 1-3/4 in Dia Brush, 0.0118 in Dia Filament/Wire, Crimped, Steel Fill
Weiler® 14301 Stem Mounted Utility Cup Brush, 1-3/4 in Dia Brush, 0.0118 in Dia Filament/Wire, Crimped, Steel Fill
Greenlee® 9952-11 Double End Replacement Utility Knife Blade, 6-3/16 in, Steel
MORSE® 20203 773 Screw Extractor, #3 Extractor, 1/8 to 1/4 in Drill, For Screw Size: 5/16 to 7/16 in, 2-11/16 in OAL
MORSE® 20203 773 Screw Extractor, #3 Extractor, 1/8 to 1/4 in Drill, For Screw Size: 5/16 to 7/16 in, 2-11/16 in OAL
MORSE® 51138 5374 Standard Length Jobber Length Drill Bit, 1/2 in Drill - Fraction, 0.5 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Bright
MORSE® 51138 5374 Standard Length Jobber Length Drill Bit, 1/2 in Drill - Fraction, 0.5 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Bright
Sioux Chief TKO™ 887-PM 1-Piece Open Closet Flange With Stainless Steel Swivel Ring, PVC
At Sioux Chief we design our open flanges with the same care and precision as we do the TKO. Contractors have found the open flange to be a cost effective alternative in those instances where a test cap is not needed. These include installations after the system is tested or where no testing is performed. We complement our complete line of open flanges with five different connection types, in ABS or PVC, 1-piece or with a corrosion-resistant, 430 stainless steel swivel ring.
MORSE® 10563 1314 General Purpose Taper Length Drill, 13/64 in Drill - Fraction, 0.2031 in Drill - Decimal Inch, 6 in OAL, HSS, Black Oxide
MORSE® 10563 1314 General Purpose Taper Length Drill, 13/64 in Drill - Fraction, 0.2031 in Drill - Decimal Inch, 6 in OAL, HSS, Black Oxide
