Grease Fittings & Adapters

Alemite® 336551 Fitting Extension, 1/4-28 Male Taper x 1/4-28 UNF-3B Female Thread, 1-1/4 in OAL, 1 in L Shank, Carbon Steel, Zinc Clear

Alemite® 51942 Straight Grease Fitting Adapter, 1/4-28 SAE-LT Taper Male x 1/8 in Female NPTF Thread, Steel, Zinc Plated

Alemite® 51943 90 deg Hydraulic Elbow, 1/4-28 Male Taper x 1/8 in Female NPTF Thread, 1.03 in OAL, 0.22 in L Shank

Alemite® A1184 Button Head Fitting, 1/8 in PTF Thread, 3/4 in OAL, 11/32 in L Shank, Trivalent Zinc Plated

Alemite® A1186 Button Head Fitting, 1/4 in NPTF Thread, 53/64 in OAL, 27/64 in L Shank, Trivalent Zinc Plated

Alemite® B1613-B 90 deg Standard Grease Fitting, 1/8 in MPTF Thread, 27/32 in OAL, 19/64 in L Shank, Trivalent Zinc Plated

Alemite® B322610 Loader Fitting, 1/8 in Female NPTF Thread

Alemite® Z737 Flush Style Standard Nozzle Coupler, 1/8 in Female NPTF Thread, Steel, Zinc Plated

Open up clogged grease fittings with the Grease Buster. Simply fill with a solvent and tap the piston with a hammer. The updated design includes a textured grip and two O rings on the piston. Manufactured by LockNLube in the USA. Cleans and flushes out old dried grease from fittings, pins, shafts, bushingsand joints, Uses penetrating fluid and hydraulic pressure, Reduces downtime. Much cheaper than new bearings, Hose extension and pneumatic piston available, Not for use with sealed bearings

HCI Preferred Supplier 36110 Ball Check Straight Grease Fitting, 1/8-27 NPTF Thread, 0.66 in OAL, Steel

Heritage™ H1688 45 deg Imperial Zerk Grease Fitting, 1/8-27 Thread, 1.07 in OAL, 0.28 in L Shank, Steel, Zinc Yellow

HCI Preferred Supplier 36120 Ball Check Grease Fitting, 1/8-27 NPTF Thread, 0.84 in OAL, Steel

HCI Preferred Supplier 36130 Ball Check Grease Fitting, 1/4-18 NPTF Thread, 0.84 in OAL, Steel

HCI Preferred Supplier 36132 Ball Check Grease Fitting, 1/4-18 NPTF Thread, 0.97 in OAL, Steel

HCI Preferred Supplier 36140 Short Ball Check Grease Fitting, 1/4-28 NPTF Taper Thread, 0.54 in OAL, Steel

HCI Preferred Supplier 36150 Ball Check Grease Fitting, 1/4-28 Taper Thread, 3/4 in OAL, Steel

HCI Preferred Supplier 36164 Ball Check Grease Fitting, 3/16 in Thread, 0.52 in OAL, Steel

HCI Preferred Supplier 36166 Ball Check Grease Fitting, 1/4 in Thread, 0.55 in OAL, Steel

HCI Preferred Supplier 36168 Ball Check Grease Fitting, M6x1 Thread, 16 mm OAL, Steel

HCI Preferred Supplier 36170 Ball Check Grease Fitting, M6x1 Thread, 21 mm OAL, Steel

HCI Preferred Supplier 36172 Ball Check Grease Fitting, M6x1 Thread, 18 mm OAL, Steel

HCI Preferred Supplier 36174 Ball Check Grease Fitting, M8x1 Thread, 16 mm OAL, Steel

HCI Preferred Supplier 36176 Ball Check Grease Fitting, M8x1 Thread, 21 mm OAL, Steel

HCI Preferred Supplier 36180 Ball Check Extra Fine Grease Fitting, M10x1 Thread, 16 mm OAL, Steel