HCI Preferred Supplier 36150 Ball Check Grease Fitting, 1/4-28 Taper Thread, 3/4 in OAL, Steel
HCI Preferred Supplier 36150 Ball Check Grease Fitting, 1/4-28 Taper Thread, 3/4 in OAL, Steel
-
BrandGeneric
-
Manufacturer Part Number36150
-
CountryUSA
-
FinishZinc Yellow
-
MaterialSteel
-
Thread Size1/4-28 Taper
-
TypeBall Check
-
Hex Size3/8 in
-
Shank Length0.2 in
-
Overall Length3/4 in
- 8000 psi maximum working pressure
- Exceeds 12 hr salt spray
- 0.1 in thread length
- 90 deg angle
-
UNSPSC40141736
-
Package Description1/PK
-
Standards/ApprovalsSAE# A515002
-
Catalog
Recently Viewed
HCI Preferred Supplier 36150 Ball Check Grease Fitting, 1/4-28 Taper Thread, 3/4 in OAL, Steel
HCI Preferred Supplier 36150 Ball Check Grease Fitting, 1/4-28 Taper Thread, 3/4 in OAL, Steel
HCI Preferred Supplier 28335 Long Extension Adapter, 1/8 in Nominal, FNPTF x MNPTF End Style, Brass
HCI Preferred Supplier 28335 Long Extension Adapter, 1/8 in Nominal, FNPTF x MNPTF End Style, Brass
HCI Preferred Supplier 28193L Light Pattern Extension Adapter, 3/8 x 1/4 in Nominal, MNPT x FNPT End Style, Brass
HCI Preferred Supplier 28193L Light Pattern Extension Adapter, 3/8 x 1/4 in Nominal, MNPT x FNPT End Style, Brass
The Crescent Nicholson American pattern, round single-cut bastard files features a circular design with teeth all the way around. These files can be used to file circular openings or concave surfaces. The single-cut construction provides light removal of material and slightly smoother edges. The slight taper in width towards the file's point creates ease of access in slots. Crafted from metal, the file's construction offers strength and durability.
The Crescent Nicholson American pattern, round single-cut bastard files features a circular design with teeth all the way around. These files can be used to file circular openings or concave surfaces. The single-cut construction provides light removal of material and slightly smoother edges. The slight taper in width towards the file's point creates ease of access in slots. Crafted from metal, the file's construction offers strength and durability.
Alemite® 1724-B 45 deg Thread Forming Fitting, 1/8 in Taper Thread, 0.83 in OAL, Steel, Trivalent Zinc Plated
Alemite thread forming fittings have special tapered drive threads which reshape the material in an untapped hole to provide a leak proof seal. They are most effectively installed by spinning into the untapped hole, but may be driven straight into the untapped hole. Thread forming fittings can be replaced by any standard threaded fitting or by another thread forming fitting.
