Leviton® 84009 Standard Size Wall Plate, 2 Gangs, 4.56 in W x 4.5 in H, 430 Stainless Steel
Leviton® 84009 Standard Size Wall Plate, 2 Gangs, 4.56 in W x 4.5 in H, 430 Stainless Steel
-
BrandLeviton®
-
UPC078477429105
-
Manufacturer Part Number84009
-
CountryUSA
-
FinishSmooth
-
Thickness0.19 in
-
Material430 Stainless Steel
-
TypeStandard Size
-
MountingSurface
-
Cutout0.942 in H x 0.406 in W Toggle Switch
-
Number of Gangs2
-
Size4.56 in W x 4.5 in H
- Accent any wall covering with a wide selection of colors and finishes
- Color matched mounting screws
- Mounting screws on 1-gang thermoplastic (nylon) are preinstalled and captive
-
Alternative Part Number7317250
-
UNSPSC39121704
-
IDEA Index ID7317250
-
IncludesMounting Screw
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed|CSA Certified|ANSI Specified|NEMA Standard
-
Warranty10 Years Limited
-
Catalog
-
Specification Sheet
Recently Viewed
Leviton® 84009 Standard Size Wall Plate, 2 Gangs, 4.56 in W x 4.5 in H, 430 Stainless Steel
Leviton® 84009 Standard Size Wall Plate, 2 Gangs, 4.56 in W x 4.5 in H, 430 Stainless Steel
MORSE® 32306 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 5/16-24 Thread, H3 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
MORSE® 32306 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 5/16-24 Thread, H3 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
Mayhew™ 21500 PRO™ Extra Long Pin Punch, 1/8 in Hex Punch, 7-7/8 in OAL, Alloy Steel
Mayhew™ 21500 PRO™ Extra Long Pin Punch, 1/8 in Hex Punch, 7-7/8 in OAL, Alloy Steel
MORSE® 32309 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 7/16-14 Thread, H3 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
MORSE® 32309 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 7/16-14 Thread, H3 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
Drillco 31E100CB 3100E Adjustable Round Split Die, M10x1.25 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder. Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Milwaukee® 49-59-2106 Annular Cutter, 1-1/16 in Dia Cutter, 2 in D Cutting, HSS, Oxide Treated, Weldon Shank
Milwaukee high speed steel annular cutters offer a thin-wall construction with an advanced tooth geometry that cuts and cleans while drilling, leading to faster holes and longer life. The cutters displace less material for the same size hole as the competition, giving you fast, burr-free holes in anything from sheet metal to thick plate steel. All Milwaukee high speed steel annular cutters have a 3/4 in. Weldon shank for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.
