Leviton® 8460 3-Phase Extra Heavy Duty Grounding Straight Blade Receptacle, 250 V AC, 60 A, 3 Poles, 4 Wires, Black
Leviton® line of extra heavy duty industrial grade receptacles are designed and manufactured to withstand the harsh conditions typically associated with industrial environments. Available in a wide variety of configurations, including isolated ground, tamper resistant, hospital grade and more, these industrial grade devices are the electrical contractors choice for use in factories, schools, hospitals and commercial office buildings.
-
BrandLeviton®
-
UPC078477843345
-
Manufacturer Part Number8460
-
CountryUSA|Canada
-
Temperature Rating-40 to 60 deg C
-
Terminal TypeSide Wire
-
MaterialThermoplastic
-
ColorBlack
-
Type3-Phase Extra Heavy Duty Grounding
-
GradeCommercial
-
NEMA RatingNEMA 15-60R
-
Voltage Rating250 V AC
-
Amperage Rating60 A
-
Horsepower10 hp
-
Number of Poles3
-
Dimensions3.75 in H x 2.75 in W x 2.1 in D
-
Number of Wires4
- Heavy gauge, double wipe copper alloy contacts
- Easy-to-wire terminals accept up to no 4 AWG conductors
- Terminals marked for easy identification and fast wiring
- All mounting hardware included
- Flush mount devices fit single or 2-gang outlet boxes
- Surface mount devices are commercial grade and have concentric knockouts for 3/4 and 1 in conduit and adjustable cord clamp for back and bottom entrance of cable
- Withstands 2000 VAC per UL 498 dielectric voltage
- Full rated current limiting
- Maximum 30 deg C after 50 cycles OL at 150% rated current temperature rise
- Nylon face and body, brass double wipe line contacts, galvanized steel strap material
- Brass-hot, green ground, white-neutral terminal ID, up to 4 AWG terminal accommodation
- Grounding
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 5HZN5 |
-
Alternative Part Number7342134
-
UNSPSC39121406
-
IDEA Index ID7342134
-
Package DescriptionEACH
-
Standards/ApprovalsNEMA WD1/WD6|ANSI C73|NOM 057|CSA C22.2 No. 42 File No. 152105|UL 498 File No. E13399/E13393|UL94 V-2 Flammability Rating
-
Warranty10 years Limited
-
RoHS
-
Instruction/Installation Manual
Recently Viewed
Leviton® 8460 3-Phase Extra Heavy Duty Grounding Straight Blade Receptacle, 250 V AC, 60 A, 3 Poles, 4 Wires, Black
Leviton® line of extra heavy duty industrial grade receptacles are designed and manufactured to withstand the harsh conditions typically associated with industrial environments. Available in a wide variety of configurations, including isolated ground, tamper resistant, hospital grade and more, these industrial grade devices are the electrical contractors choice for use in factories, schools, hospitals and commercial office buildings.
Hougen® Rotabroach® 12220 12000 Annular Cutter, 5/8 in Dia Cutter, 2 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
Leviton® 5207-S10 Grounding Shallow Single Straight Blade Receptacle, 125/250 V AC, 30 A, 3 Poles, 3 Wires, Black
Leviton® 5207-S10 Grounding Shallow Single Straight Blade Receptacle, 125/250 VAC, 30 A, 3 Poles, 3 Wires, Black
Weiler® 10007 Stem Mount End Brush, 3/4 in Dia Brush, Crimped, 0.014 in Dia Filament/Wire, Steel Fill, 7/8 in L Trim
Weiler® 10007 Stem Mount End Brush, 3/4 in Dia Brush, Crimped, 0.014 in Dia Filament/Wire, Steel Fill, 7/8 in L Trim
Hougen® Rotabroach® 12272 12000 Annular Cutter, 2-1/4 in Dia Cutter, 2 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
Heavy-duty bakelite crowfoot-design electrical receptacle with 2-pole/3-wire grounding for surface mounting 50 AMP 125/250-volt capacity
