COLEMAN CABLE 50' 14/3 SJT TRIPLE TAP EXT/CORDS ECI 04218
Prime® outdoor extension cords are water, weather and abrasion-resistant and flame retardant. The 3-outlet triple tap brings power to 3 tools with up to a 15 a total load from one extension cord.
-
BrandPRIME®
-
UPC054732600922
-
Manufacturer Part NumberEC600725K
-
CountryCanada
-
Temperature Rating-40 to 140 deg F
-
Plug TypeGrounded
-
ColorYellow
-
TypeTriple Tap SJTW
-
Conductor Size14 AWG
-
Cord Length25 ft
-
Number of Conductors3
-
Number of Outlets3
-
Electrical Ratings125 V, 15 A, 1875 W
- Oversized plugs and strain reliefs prevent wire from separating from the plugs
- 3-outlet triple-tap brings power to 3 tools from one cord
- Nickel coated brass blades resist corrosion and arcing
- Water-resistant
- Flame-retardant
-
UNSPSC26121536
-
Package Description1/PK
-
Standards/ApprovalsOSHA Compliant|cETLus Listed|PROP65: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) and Diisononyl phthalate (DINP), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Recently Viewed
Prime® outdoor extension cords are water, weather and abrasion-resistant and flame retardant. The 3-outlet triple tap brings power to 3 tools with up to a 15 a total load from one extension cord.
BBI 400052 Partially Threaded Cap Screw, 1/4-28, 2 in L Under Head, A2 (18-8) Grade, Stainless Steel
BBI 400052 Partially Threaded Cap Screw, 1/4-28, 2 in L Under Head, A2 (18-8) Grade, Stainless Steel
ISOSTATIC™ Oilube® 401373 Round Bore Sleeve Bearing, 1-1/8 in Dia Bore, 1-3/8 in OD, 1-3/4 in W
ISOSTATIC™ Oilube® 401373 Round Bore Sleeve Bearing, 1-1/8 in Dia Bore, 1-3/8 in OD, 1-3/4 in W
NIBCO® 851-015 1-Piece Solid Flange, 1-1/2 in, PVC, Socket, 150 lb, 5-1/32 in OD, Domestic
NIBCO® 851-015 1-Piece Solid Flange, 1-1/2 in, PVC, Socket, 150 lb, 5-1/32 in OD, Domestic
Milwaukee® 49-57-1689 Tang Drive Annular Cutter, 1-11/16 in Dia Cutter, 1 in D Cutting, Quick-Change Shank
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 1-11/16 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre-punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
ISOSTATIC™ Oilube® 401350 Round Bore Sleeve Bearing, 1 in Dia Bore, 1-1/2 in OD, 1 in W
ISOSTATIC™ Oilube® 401350 Round Bore Sleeve Bearing, 1 in Dia Bore, 1-1/2 in OD, 1 in W
