519059 DO-IT-BEST/HWI PRODUCTS
SURFACE MOUNT TELEPHONE JACK-JWH519059 >
Recently Viewed
SURFACE MOUNT TELEPHONE JACK-JWH519059 >
1-QT RUS-KIL PASTEL BASE-BLP14205QT >
Precision Brand® 16A4 Shim Stock, 1008-1010 Full Hard Steel, 100 in Roll L x 6 in W x 0.004 in THK
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Sealmaster® 701863 MP Series Medium Duty Pillow Block Ball Bearing Unit, 1-7/16 in Dia Bore, 5 to 6-3/8 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 8 in OAL x 4-3/16 in OAH
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
HCI Preferred Supplier 28221 Hex Reducer Nipple, 3/8 x 1/8 in Nominal, 1.22 in L, Brass, MNPT End Style
Brass fittings are popular because they are strong and durable and hence widely used in industrial and residential applications. The use of brass to make various fittings provides a distinct look because of its yellow color. The advantages of brass for fittings include its good corrosive resistance and also its plating, joining, polishing and finishing characteristics. Brass as a material is easily machined and hence can be given any shapes of the various types of fittings available.
United Abrasives-SAIT 25020 HR241 Fluted Hand Rub, 6 in L x 2 in W x 2 in THK, C24R Grit, Silicon Carbide Abrasive
The vitrified bonding technique uses a high temperature process whereby abrasive materials are heated to a point where the grains fuse to each other, forming the bond posts. Vitrified products, although somewhat brittle are not affected by water, oil, most acids or temperature changes. Used primarily for precision and fixed feed applications, they are particularly well suited for bench grinders and offhand tool room applications.
