511757 DO-IT-BEST/HWI PRODUCTS
25' PHONE CORD WITH DUPLEX JACK-JWH511757 >
Recently Viewed
25' PHONE CORD WITH DUPLEX JACK-JWH511757 >
Dodge® 123820 211 Normal Duty Pillow Block Ball Bearing Unit, 2-3/16 in Dia Bore, 6 to 6.68 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8.88 in OAL x 4.96 in OAH
Dodge® 123820 211 Normal Duty Pillow Block Ball Bearing Unit, 2-3/16 in Dia Bore, 6 to 6.68 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8.88 in OAL x 4.96 in OAH
WERNER® 7124-2 7100-2 Round Rung Extension Ladder, 24 ft OAL, 375 lb Load, 12 in Adjustable Increments, Fiberglass, Type IAA
The 7124-2 fiberglass 24 ft extension ladder is made with non-conductive fiberglass side rails featuring TRACTION-TRED® slip resistant round rungs. The top of the fly section has pre-pierced holes for easy installation of accessories. Guides at the top of the base and internal guides at bottom of fly section securely interlock the rails. The plate and rung assemblies are riveted at four points to the side rails. The base and fly sections separate easily to use base section as a single ladder. Durable rail shield and shoe brackets protect rails from damage. These durable ladders boast a duty rating of 375 pounds.
Dodge® 131849 212 Normal Duty Pillow Block Ball Bearing Unit, 2-7/16 in Dia Bore, 6.88 to 7.94 in L Bolt Center-to-Center, 2.69 in Base to Bore Centerline, 9-1/2 in OAL x 5.34 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value.
Jacobs® 30233 18N Super Drill Chuck, 1/8 to 3/4 in Capacity, 4JT Mounting, Ball Bearing, K4
Jacobs® 30233 18N Super Drill Chuck, 1/8 to 3/4 in Capacity, 4JT Mounting, Ball Bearing, K4
Dodge® 131434 215 Normal Duty Pillow Block Ball Bearing Unit, 2-15/16 in Dia Bore, 8-1/2 to 9-1/2 in L Bolt Center-to-Center, 3.31 in Base to Bore Centerline, 11-3/4 in OAL x 6.56 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value.
