Aluminum Building Wires - THHN
ALE1/0THHNBLK- #1/0 THHN BLACK STRAND WIRE. 600V RATED, SUNLIGHT RESISTAND 1/0 AND LARGER, CABLE TRAY USE 1/0 & LARGER: VS-1 RATED
GASOLINE AND OIL RESISTAND. AVAILABLE IN LOW AND HIGH VOLTAGE COLORS THE CONDUCTORS ARE SOLFT-ANNEALED, STRANDED OR SOLID COPPER AND ANRE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKET IS APPLIED.
-ALE1/0THHNBLK >
ALE10-THHN BLUE STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
-ALE10THHNBLU >
ALE10THHNBRN 10-THHN BROWN STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
-ALE10THHNBRN >
ALE10THHNGRN 10-THHN GREEN STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
L-ALE10THHNGRN >
ALE10THHNORG 10-THHN ORANGE STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
-ALE10THHNORG >
ALE10THHNWHT 10-THHN WHITE STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
-ALE10THHNWHT >
ALE10THHNWHT 10-THHN WHITE STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
)-ALE10THHNWHTSOLID>
WCNM-2/0-B #2/0 Black Welding Cable 500'
#2/0 BLACK WELDING CABLE 500' ROLL - GVIWCNM2/0B >
WCNM-4-B #4 Black Welding Cable 500'
#4 BLACK WELDING CABLE 500' ROLL - GVIWCNM4B >
WCNM-4/0-B #4/0 Black Welding Cable 500'
#4/0 BLACK WELDING CABLE 500' ROLL -GVIWCNM4/0B >
Recently Viewed
11-TOOTH #40-1 CHAIN SPROCKETS IDC 40-B-11-F-3/4
11 TOOTH SPROCKETS FOR #40 CHAIN
DuMONT Minute Man® replacement shims for use with Keyway Broaches are available for spares and to replace lost or damaged shims. The smallest Broaches cut in one pass and require no shim. Multiple pass Keyway Broaches are furnished with all necessary shims unless otherwise noted. Progressive shims may be purchased for use with our largest Keyway Broaches. A shim is required to compensate for the thickness removed following a Keyway Broach's cutting pass. The addition of a shim serves to move the Broach forward towards its standard finished cutting depth. Subsequent passes require the stacking of shims. Replacement or extra shims are provided in shim sets corresponding to the Broach size and letter designation in the quantity necessary to cut to standard depth. Please specify EDP number when ordering replacement or extra shims.
PLASTIC HANDLED STAINLESS STEEL CLEANING BRUSH - MAG270 >
2" PVC TRU-UNION BALL VALVE - NIB1601020 >
The Crescent Nicholson American pattern square, double cut file features a square design with teeth all the way around. These files can be used on slots, keyways, or just for general surface filing. The double-cut construction allows for faster material removal from the workpiece. The slight taper in width towards the file's point creates ease of access in slots. Crafted from metal, the file's construction offers strength and durability.
Jackson Safety* 14414 Sentry III Cap Style Hard Hat, 6-1/2 Fits Mini Hat, 8 Fits Max Hat, HDPE, 6-Point Suspension, ANSI Electrical Class Rating: Class C, E and G, ANSI Impact Rating: Type I, Ratchet Adjustment
