Aluminum Building Wires - THHN
ALE1/0THHNBLK- #1/0 THHN BLACK STRAND WIRE. 600V RATED, SUNLIGHT RESISTAND 1/0 AND LARGER, CABLE TRAY USE 1/0 & LARGER: VS-1 RATED
GASOLINE AND OIL RESISTAND. AVAILABLE IN LOW AND HIGH VOLTAGE COLORS THE CONDUCTORS ARE SOLFT-ANNEALED, STRANDED OR SOLID COPPER AND ANRE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKET IS APPLIED.
-ALE1/0THHNBLK >
ALE10-THHN BLUE STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
-ALE10THHNBLU >
ALE10THHNBRN 10-THHN BROWN STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
-ALE10THHNBRN >
ALE10THHNGRN 10-THHN GREEN STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
L-ALE10THHNGRN >
ALE10THHNORG 10-THHN ORANGE STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
-ALE10THHNORG >
ALE10THHNWHT 10-THHN WHITE STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
-ALE10THHNWHT >
ALE10THHNWHT 10-THHN WHITE STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
)-ALE10THHNWHTSOLID>
#2/0 BLACK WELDING CABLE 500' ROLL - GVIWCNM2/0B >
#4 BLACK WELDING CABLE 500' ROLL - GVIWCNM4B >
#4/0 BLACK WELDING CABLE 500' ROLL -GVIWCNM4/0B >
Recently Viewed
KrylonĀ® Quik-Markā¢ K07095 Extra Large Hand Held Spotter Marking Wand, 12 in OAL, For Use With Quik-Markā¢ Marking Paints, Plastic/Steel
LittelfuseĀ® POWR-GARDĀ® LKN600 LKN Fuse Link, 250 VAC, 600 A, For Use With RLN Series Class H Single Element Renewable/Fast Acting Fuse
The LKN Series are fuse links designed for Littelfuse RLN series renewable fuses. Traditionally, Class H fuses were used to provide low cost protection of general purpose feeder and branch circuits where available short-circuit currents did not exceed 10,000 amperes. However, generally increased levels of available fault current and the distinct possibility that renewable fuses may be improperly renewed, rendering them unsafe, have all but eliminated the use of these fuses in new applications. In addition, escalating labour costs and increasing automation, which makes downtime very expensive, have greatly reduced or eliminated the cost savings attributed to renewable fuses.
3/8" CLEVIS SLIP HOOK WITH LATCHES, DESIGNED SPECIFICALLY FOR GRADE 43 CHAIN & ARE HELD ONTO THE CHAIN BY BOLT & COTTER PIN ASSEMBLY, INCLUDES A LATCH TO HELP SECURE LOAD-DIX67373 >
The McGillĀ® CAMROLĀ® full complement needle bearings feature black oxide treated bearing steel. They are available in two basic mounting styles for use in mechanical automation or linear motion applications. Our basic features each contribute to superior performance. The LUBRIDISCĀ® seal option helps prevent metal to metal contact within the bearing. It also provides a barrier for containment entry and blowout protection when relubricating. These bearings are available with several dimensional choices. The seal options and combinations provide a specific solution for each application. Within the following section you can learn more about these features and how they can be applied to your application.
#78 WOOD RECIPROCATING SAW BLADES--PACK OF 5 - MAK7925417>
ZurnĀ® QickTiteĀ® QAC22 Assembled Coupling, 3/8 in Nominal, CTS End Style
