Heat Shrink Tubing
Gardner Bender HST-750 Heat Shrink Tubing, 3/4 in ID Expanded, 3/8 in ID Recovered, 4 in L, Polyolefin, Black
The Gardner Bender 3/4 in heat shrink tubing (2-Pack) provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin.
Gardner Bender HST-500 Heat Shrink Tubing, 1/2 in ID Expanded, 1/4 in ID Recovered, 4 in L, Polyolefin, Black
The Gardner Bender 1/2 in heat shrink tubing (3-Pack) provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin.
Gardner Bender HST-375 Heat Shrink Tubing, 3/8 in ID Expanded, 3/16 in ID Recovered, 4 in L, Polyolefin, Black
The Gardner Bender 3/8 in heat shrink tubing (3-Pack) provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin.
Gardner Bender HST-250 Heat Shrink Tubing, 1/4 in ID Expanded, 1/8 in ID Recovered, 4 in L, Polyolefin, Black
Thin wall heat-shrink tubing is constructed from durable, flame-retardant black polyolefin which is resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides superior mechanical, abrasion and moisture protection but also strengthens connections and provides a comfortable gripping surface. As a result, professional and DIY multi-purpose uses include repairing cords (ranging from large appliance cords to small electronic cables that show wear at pull-out), covering tool and sporting equipment handles, and sealing rope for neat, unravel resistant ends. Finally, tubing capably resists common fluids and solvents. Upon heating to 120 deg C (250 deg F) the tubing begins to shrink but will not drip, crack or flow and is self-extinguishing within 30 seconds. Meets UL 224, 125 deg C: CSA C22.2 No3 198.1, 125 deg C; MIL-DTL-23053/5, Class 1 and 2, AMS 3636 and 3637, DEF STAN 59-79, Issue 3 Type 2a. Continuous operating temperature: -55 deg C (-67 deg F) to 135 deg C (275 deg F). Shrink temperature: 120 deg C (250 deg F) to 250 deg C (480 deg F). 600 V/Mil Dielectric strength.
Gardner Bender HST-187 Heat Shrink Tubing, 3/16 in ID Expanded, 3/32 in ID Recovered, 4 in L, Polyolefin, Black
The Gardner Bender 3/16 in heat shrink tubing (8-Pack) provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin.
Gardner Bender HST-125 Heat Shrink Tubing, 1/8 in ID Expanded, 1/16 in ID Recovered, 4 in L, Polyolefin, Black
Thin wall heat-shrink tubing is constructed from durable, flame-retardant black polyolefin which is resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides superior mechanical, abrasion and moisture protection but also strengthens connections and provides a comfortable gripping surface. As a result, professional and DIY multi-purpose uses include repairing cords (ranging from large appliance cords to small electronic cables that show wear at pull-out), covering tool and sporting equipment handles, and sealing rope for neat, unravel resistant ends. Finally, tubing capably resists common fluids and solvents. Upon heating to 120 deg C (250 deg F) the tubing begins to shrink but will not drip, crack or flow and is self-extinguishing within 30 seconds. Meets UL 224, 125 deg C: CSA C22.2 No3 198.1, 125 deg C; MIL-DTL-23053/5, Class 1 and 2, AMS 3636 and 3637, DEF STAN 59-79, Issue 3 Type 2a. Continuous operating temperature: -55 deg C (-67 deg F) to 135 deg C (275 deg F). Shrink temperature: 120 deg C (250 deg F) to 250 deg C (480 deg F). 600 V/Mil Dielectric strength.
Recently Viewed
P-2-BSD-111-E Dodge® 066252 111 Special Duty Pillow Block Roller Bearing Unit, 1-11/16 in Dia Bore, 7.56 to 7.94 in L Bolt Center-to-Center, 3.13 in Base to Bore Centerline, 9-1/2 in OAL x 6.81 in OAH
Dodge® special duty double row tapered roller bearings have the highest capacity of all Dodge® tapered roller bearings. they carry heavy radial loads and combined radial and thrust loads. The maximum recommended load which can be applied is limited by various components in the system such as bearing, housing, shaft, shaft attachment, speed and life requirements. Dodge® special duty tapered roller bearings have been applied successfully even when these limits have been exceeded under controlled operating conditions.
Milwaukee® M18 FUEL™ 2857-22 Cordless Impact Driver Kit, 1/4 in Hex Drive, 4300 bpm, 2000 in-lb Torque, 18 V, 4.59 in OAL
Our M18™ FUEL™ 1/4 in impact driver with ONE-KEY™ XC kit is the fastest, most compact and most powerful tool in its class. The POWERSTATE™ brushless motor produces up to 2000 in-lb of torque, delivering up to 30% faster driving speed, increasing the impact drills productivity for the most demanding fasteners on the job. At only 4.59 in L, this is the most compact impact driver in its class, giving you better access in tight spaces. REDLINK™ Plus™ intelligence tool technology ensures maximum performance while protecting from overloads, heating and over discharge. Our included M18™ REDLITHIUM™ XC5.0 battery packs deliver more work per charge and more work over the life of the packs than competitors. With ONE-KEY™, you gain the ability to customize, track and manage your hex impact driver. ONE-KEY™ technology also allows you to save up to 4 task settings directly to the tool. Self-tapping screw mode provides faster installation time, shutting the hex driver down as soon as the fastener is seated to reduce damage to fasteners and materials. If your tool is ever lost or stolen, its tracking functionality can lock it out to protect your investment.
Milwaukee® M18™ FUEL™ 2853-22 Cordless Impact Driver Kit, 1/4 in Hex Drive, 4300 bpm, 2000 in-lb Torque, 18 V DC, 4.59 in OAL
The M18™ FUEL™ 1/4 in hex impact driver is the fastest, most compact and most powerful tool in its class. The POWERSTATE™ brushless motor delivers upto 2000 in-lb of torque and upto 30% faster driving speed, increasing user productivity for the most demanding fasteners on the job. At only 4.59 in L, this is the most compact tool in its class, allowing users to have more access in tight spaces. The REDLINK™ Plus™ intelligence ensures maximum performance and protects from overloads, heating and or over-discharge. The REDLITHIUM™ battery pack delivers more work per charge and more work over the life of the pack when compared to competitors. The 4-Mode DRIVE CONTROL™ provides greater control over output speed and power, for greater versatility. The self-tapping screw mode provides faster installation time by reducing stripping of fasteners.
BIN STORAGE CABINETS (48 CU/FT) -KNA129 >
14-VOLT .27-AMPS MINIATURE BAYONET BULB-BUL1895 >
GEARWRENCH® 81667 Long Length Open End Combination Wrench, 10 mm Wrench, 12 Points, 15 deg Offset, 166 mm OAL, Premium Alloy Steel, Polished Chrome
The GEARWRENCH combination wrenches are durable tools for most jobs. They are made from alloy steel with either a full polish or satin finish that resists rust & corrosion. The off-corner loading design on both ends provides a stronger grip on fasteners, reduces fastener rounding, and delivers up to 25% more torque to the fasteners. Sizes are stamped on the beam for quick, easy, & permanent identification. The box end is offset 15° for increased access to fasteners. Available in stubby & long pattern lengths and 6 & 12 point, the GEARWRENCH combination wrenches are a must have for every toolbox.
