BernzOmatic TS-8000-T On-Demand Professional Torch JWH 385816
The Mag-Torch® MT 579 is a high performance silver swirl MAP-Pro™ torch that delivers an extreme swirl flame, it has an on demand trigger giving you instant ignition and flame shut off. This torch has a safety trigger lock to prevent unwanted ignition and it also has a trigger lock for continuous flame setting. This torch can solder upto 2 in of copper.
-
BrandMag-Torch®
-
UPC024968579033
-
Manufacturer Part NumberMT 579 C
-
CountryUSA
-
MaterialCast Aluminum
-
Specifications2200 deg F Flame, 13000 Btu/hr Output, 11-1/2 in OAL
-
Suitable For Use WithBernzOmatic® 14.1 oz MAP-Pro Hand Torch Cylinder
-
TypeOn-Demand Professional
- On demand trigger for instant On and Off
- Delivers a strong swirl flame
- Replaceable burn tube assembly
- Brass burn tip for durability
- 360 deg swivel for versatility
- Auto igniter lock for continuous flame setting
- Igniter safety lock
- Ergonomic hand grip enhances comfort
- Regulator that allows for a consistent flame regardless of angle or temperature
- Use with MAP/Pro™ or propane fuel
- Flame temperature and Btu/hr ratings were tested internally based on preferred fuels at normal indoor conditions and assumed Btu rates per gram of fuel
| Cross-Reference Number |
|---|
| 385816 |
-
UNSPSC23271821
-
WarrantyLimited Lifetime
-
Instruction/Installation Manual
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
The Mag-Torch® MT 579 is a high performance silver swirl MAP-Pro™ torch that delivers an extreme swirl flame, it has an on demand trigger giving you instant ignition and flame shut off. This torch has a safety trigger lock to prevent unwanted ignition and it also has a trigger lock for continuous flame setting. This torch can solder upto 2 in of copper.
Browning® 1296391 Automatic Torque Limiter, 1 in Straight Bore, 3-1/2 in OD, 1800 in-lb (1 Spring)/3000 in-lb (2 Spring) Torque
Browning® torque limiters are torque control devices that slip under excessive load but automatically carry the desired load after the excess has been removed. The device can be easily adjusted to slip at a desired overload and automatically re-engage when overload is removed. Overload should be removed promptly since prolonged slippage can be detrimental to the friction disc. Generally, no resetting is required after the torque limiter has slipped. Torque limiters help prevent machine and product damage and costly downtime caused by shock loads, overloads or machine jams but should not be used as clutches.
2" BUNA-N CAM & GROOVE GASKETS-DXN200GTHK >
Jacobs® 30343 Chuck Service Kit, For Use With 8-1/2N Model Chucks
MORSE® 58228 5942 Ball Nose Center Cutting Regular Length Single End End Mill, 7/16 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 7/16 in Dia Shank, 2-3/4 in OAL, Bright
Browning® 3750064 Taper Lock Bushing, 1 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL, Steel
Browning® 3750064 Taper Lock Bushing, 1 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL, Steel
