Electric Tankless Water Heaters
STIEBEL ELTRON 220816 Mini™ Single Handwashing Sink Electric Tankless Water Heater, 120 V AC, 3000 W, 1 ph, 3/8 in Water, 25 A, Commercial/Residential/Dual: Commercial
The tankless electric water heater shall be equipped with a bare wire nickel chrome type heating element housed in fiberglass reinforced high temperature plastic containment. The housing of the unit shall be made of high impact polycarbonate plastic. The flow switch that operates the heating element shall be of the mechanical pressure differential type. The unit shall be equipped with a safety high-limit switch with manual reset. The water connections shall be designed for standard 3/8 in O.D. flexible braided stainless steel hose type connectors. The unit shall be mounted with water connections facing either top or bottom only. The units shall ship with a AWG #12 wire harness with a length of 2 ft. The unit shall conform to ANSI /UL. 499 and be certified to CAN/CSA E335-1 and E335-2-35.
Recently Viewed
Apex® M-14MM13 Magnetic Socket, Short Style, 3/8 in Square Drive, 14 mm 6-Point/Hex Socket, 6 Points
Apex® M-14MM13 Magnetic Socket, Short Style, 3/8 in Square Drive, 14 mm 6-Point/Hex Socket, 6 Points
ALE 6THHNWHT 6 AWG, STRANDED, THHN WIRE, COPPER, WHITE, 1 CONDUCTOR.
WIRE USED FOR COMMERCIAL AND INDUSTRIAL INSTALLATIONS. IT CAN BE USED IN WET OR DRY LOCATIONS. USED IN CONDUIT, CABLE TRAYS, BRANCH CIRCUITS, AND APPLIANCE WIRING.
- ALE6THHNWHT >
35-MM 12-POINT COMBINATION WRENCH - TABCW35MM>
Irwin® 5026019 Rotary Masonry Drill, 5/8 in Drill Bit, Round Shank, Tungsten Carbide Cutting Edge, 6 in OAL
Tungsten carbide tip is durable when drilling in concrete and brick. Deep single flute removes dust fast for increased drilling speed and longer bit life. Diamond ground tip has aggressive cutting angles for increased drilling speed. Fits all hammer drills with 3-jaw or Jacobs chuck.
5/16" Lead Machine Screw Anchors
Milwaukee® 48-20-3992 4-Cutter Rotary Hammer Drill Bit, 1-3/4 in Drill Bit, 45/64 in SDS-Max Shank, 18 in D Cutting, Carbide Cutting Edge, 23 in OAL
The MILWAUKEE® MX4™ 4-Cutter SDS Max Rotary Hammer Drill Bits with solid head carbide deliver up to 5x longer life in concrete with rebar. Engineered with rebar guards to provide maximum durability in hard aggregate and rebar. Milwaukee designed their MX4™ 4-Cutter bits with sharp centering tips for exact spot drilling in concrete. The integrated 4-cutter design prevents lock-up in rebar, reducing downtime. Optimized flutes remove dust faster, reducing heat and delivering up to 15% more holes per battery charge. The wear mark indicator on each drill bit shows you when they no longer meet the ANSI requirement. These MILWAUKEE® MX4™ 4-Cutter Drill Bits are ideal for concrete with rebar and masonry applications.
