Selkirk® by Duravent 106400 Support Assembly, 6-5/8 in ID, For Use With: Type-B Gas Vent Systems, Steel
Selkirk® by Duravent 106400 Support Assembly, 6-5/8 in ID, For Use With: Type-B Gas Vent Systems, Steel
-
BrandSelkirk® by Duravent
-
UPC053713126703
-
Manufacturer Part Number106400
-
CountryUSA
-
FinishGalvanized
-
MaterialSteel
-
Inside Diameter6-5/8 in
-
Outside Diameter6-5/8 in
-
Suitable For Use WithType-B Gas Vent Systems
- Support plate should be installed above the joist
- Support plate also serves as a firestop
- Supports a maximum of 35 ft of gas vent
- 6 in Size
-
Alternative Part Number6RV-GVS
-
UNSPSC40101500
-
WarrantyLimited Lifetime
-
Warranty Information
-
Catalog
Recently Viewed
Selkirk® by Duravent 106400 Support Assembly, 6-5/8 in ID, For Use With: Type-B Gas Vent Systems, Steel
Selkirk® by Duravent 106400 Support Assembly, 6-5/8 in ID, For Use With: Type-B Gas Vent Systems, Steel
Browning® 1108638 Single Strand Plate Type A Roller Chain Sprocket, 23/32 in Dia Bore, 10.48 in OD, #40 Chain, 64 Teeth, 1/2 in Pitch, Steel
Browning® 1108638 Single Strand Plate Type A Roller Chain Sprocket, 23/32 in Dia Bore, 10.48 in OD, #40 Chain, 64 Teeth, 1/2 in Pitch, Steel
Browning 28-TOOTH #40-1-CHAIN SPROCKETS BRW H-4028 X 1-1/8
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
1" X 12" USS GR-5 Hex Head Capscrew
Browning 24-TOOTH #60-1 CHAIN SPROCKETS BRW H-6024 X 1-1/2
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
Littelfuse® POWR-GARD® NLS060 Fast Blow One Time Fuse, 60 A, 600 V AC/400 V DC, 20/50 kA Interrupt, Class: K5, Cartridge Body
NLS series fuses provide low cost protection for general purpose feeder and branch circuits when available short circuit currents are less than 50000 A. They replace all Class H fuses which have only a 10000 A interrupting rating. They are suitable for use in many residential and smaller commercial and industrial applications. NLKP series fuses are Canadian "Code" fuses specifically designed to meet Canadian electrical code type P fuse requirements for residential use. They have a 10000 A interrupting rating. However, to obtain the added benefits of time delay, current limitation and higher interrupting rating, consider the use of POWR-PRO® IDSR Indicator fuses for circuits between 250 and 600 V. The user gets all the benefits of time delay RK5 fuses plus the added benefits of a n indicating fuse that tells when it has opened. complete information on these fuses may be found in the POWR-PRO® section of this catalog. for circuits upto 250 V, see FLNR fuses in this section of the catalog.
