Selkirk® by Duravent LockTab® 103018 RV Series Type B Small Diameter Double Wall Round Gas Vent Pipe, Steel, 3 in Dia x 18 in L, Galvanized
Our non-positional lock system on the Selkirk® by Duravent RV Gas Vent is the best lock system on the market today. The incorporation of the LockTab® feature simply improves our lock system by adding flexibility and meeting market needs.
-
BrandSelkirk® by Duravent
-
UPC053713125256
-
Manufacturer Part Number103018
-
CountryUSA
-
FinishGalvanized
-
Thickness0.012 in
-
MaterialSteel
-
TypeType B Small Diameter Double Wall Round
-
SeriesRV Series
-
Diameter3 in
-
Length18 in
- The locktab is located on the female end of the gas vent
- Assemble the gas vent sections
- The locktab is then depressed with a thumb or blunt object such as a screwdriver into the lock channel of the male end
- To disengage the locktab, pry it up by using a screwdriver or knife blade
- The RV line of Selkirk round vent pipe and fittings is designed for use on approved gas appliances in residential and light commercial and industrial applications
- Round vents for large appliances will be found in the QC section which follows
- The Outside Diameter of RV is approximately 1/2 in larger
- Outer material is 28 ga galvanized steel and inner liner is aluminum
- Easy to assemble and can be combined to obtain the required installation height
- Sectional overlap of 1.5 in and hence net assembled length is 1.5 in less than listed lengths
- Inner liner of aluminum alloy 1100, 3003, 3104, 3105 or 5010
- Outer wall of UL recognized G90 galvanized steel
-
Alternative Part Number3RV-18
-
UNSPSC40101506
-
Standards/ApprovalsNFPA 211/54|UL 441|ULC S605
-
WarrantyLimited Lifetime
-
Catalog
-
Instruction/Installation Manual
-
Warranty Information
-
Specification Sheet
Recently Viewed
Selkirk® by Duravent LockTab® 103018 RV Series Type B Small Diameter Double Wall Round Gas Vent Pipe, Steel, 3 in Dia x 18 in L, Galvanized
Our non-positional lock system on the Selkirk® by Duravent RV Gas Vent is the best lock system on the market today. The incorporation of the LockTab® feature simply improves our lock system by adding flexibility and meeting market needs.
Dodge® 123812 207 Normal Duty Pillow Block Ball Bearing Unit, 1-3/8 in Dia Bore, 4.68 to 5.44 in L Bolt Center-to-Center, 1.88 in Base to Bore Centerline, 6-1/2 in OAL x 3-3/4 in OAH
For over 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built to manufacture the new Dodge® design. The result is the Dodge® SC/SCM/SL line. Its premium features make it the most reliable setscrew mounted ball bearing on the market and provides the user unmatched quality and true total value.
Conductor Range: 6 AWG to 250 kcmil (MCM) stranded copper wires. Stud/Bolt Size: 3/8-inch mounting hole. Drive Size: 1/4-inch internal hex main drive screw. Voltage & Temperature: Rated for up to 35 kV (with proper high-voltage insulation spacing techniques) and a maximum temperature of 90°C.Pre-Filled Compound: Contains DE-OX® oxide inhibitor to protect contact surfaces from corrosion. Certifications: UL 467 Listed (Grounding and Bonding), UL 486A/B Listed, and CS
1-3/4" - OPENED SPHERICAL PLAIN BEARING-AURGEZ028ES >
Product Type: Jaw & Eye Swivel (Model G-403).Size (Diameter): 1/2 inch. Working Load Limit (WLL): 3,600 lbs (1.8 short tons). Material: Forged carbon steel, quenched and tempered for maximum durability .Finish: Hot-dip galvanized for high corrosion resistance.
.001" 3" X 3" SLOT S/S SHIM-PK/20-PRC42305>
