NIBCO T134-1-1/2 Rising Stem Gate Valve, 1-1/2 in Nominal, NPT End Style, 150 lb, Bronze Body, Handwheel Actuator, Domestic
The Apollo™ Model 107T (30 Series) Gate Valve provides a cost effective Made in the USA alternative to globally sourced multi-turn valves. These valves are cast, machined, assembled, and tested in South Carolina. The Apollo™ gate valve is ideal for use in a wide variety of plumbing and heating applications including building service piping systems.
-
BrandApollo™
-
UPC670750666551
-
Manufacturer Part Number3020701
-
CountryUSA
-
Temperature Rating-20 to 406 deg F
-
Port TypeFull
-
Pressure Class150 lb
-
Pressure Rating300 psi CWP
-
Flow Rate119 gpm
-
Top to Inlet Center9.13 in Open
-
Trim MaterialBrass/Bronze
-
TypeRising Stem
-
Actuator TypeHandwheel
-
Nominal Size1-1/2 in
-
Series107T
-
Dimensions2.88 in L
-
Softgoods MaterialGrafoil
-
Domestic/ImportDomestic
-
Body MaterialBronze
-
End StyleNPT
- Guided solid bronze disc wedge
- Adjustable graphite stem packing
- Dezincification resistant
- 100% factory tested
- Union bonnet
- Malleable iron rugged hand wheel
- Brass stem/bronze disc wedge
- Grafoil packing
-
Alternative Part Number107T112
-
UNSPSC40141613
-
Package Description1/BX
-
Standards/ApprovalsARRA Compliant|ASME B1.20.1|ASTM B62 Body/Disc Wedge|ASTM B21 UNS C46400 Stem|CRN 0C14667.5|MSS SP-80|PROP65: Cancer and Reproductive Harm
-
Warranty5 Years
-
Warranty Information
-
Specification Sheet
-
Owners/User Manual
Recently Viewed
NIBCO T134-1-1/2 Rising Stem Gate Valve, 1-1/2 in Nominal, NPT End Style, 150 lb, Bronze Body, Handwheel Actuator, Domestic
The Apollo™ Model 107T (30 Series) Gate Valve provides a cost effective Made in the USA alternative to globally sourced multi-turn valves. These valves are cast, machined, assembled, and tested in South Carolina. The Apollo™ gate valve is ideal for use in a wide variety of plumbing and heating applications including building service piping systems.
Browning® 765250 VER200 Standard-Duty Straight Bore Ball Bearing Insert With Snap Ring, 1-3/16 in Dia Bore, 2.4409 in OD, 1 Rows, 1-1/2 in W, 4381 lb Dynamic/2567 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Browning® 767578 VS 100 Intermediate Duty Straight Bore Ball Bearing Insert, 1-3/16 in Dia Bore, 2.4409 in OD, 1-5/32 in W, 4381 lb Dynamic/2567 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Cuts up to 150 mm (5.91 in) and welds up to 9 mm (0.35 in) with proper tips. Cuts up to 5 mm (0.20 in) and welds 1.98 mm (5/64 in) right out of the box. Ideal for general maintenance medium-duty fusion welding, braze welding, brazing, hand cutting applications, HVAC and automotive repair. For use in light fabrication, in the shop, on the farm or ranch and at home. 250-series regulators. 100-series torch handle. 1350-series cutting attachment. 0-3-101 cutting tip. W-1-0 welding tip. 1/4 in (6.35 mm) x 12.5ft (3.81 m) twin welding hose with fittings. Built-in check valves and flashback arrestor. Accessories included: 50 mm (1.97 in) cup type shade #5 goggles, round single flint striker, 13-piece tip cleaner and plastic carry case.
Williams® JHWWG-6 Heavy Duty Set-Up Wedge, 6 in L x 1-1/4 in W x 3/4 in H, Forged Steel
Williams® JHWWG-6 Heavy Duty Set-Up Wedge, 6 in L x 1-1/4 in W x 3/4 in H, Forged Steel
Justrite® 27608 Dip Tank, 8 gal Capacity, 15-5/8 in Dia x 14-1/4 in H, Galvanized Steel, Red
Use for cleaning parts and subassemblies where the volume of work does not warrant a larger rinse tank. Portable size accommodates changing production requirements. Dip tank covers stay open for convenient access; self-closing mechanism and fusible link melts at 165°F (74ºC) to snap the cover shut in case of fire. Dip tank with polyethylene liner offers outstanding chemical resistance to permit use with the harsh, corrosive chemicals. For effective cleaning of parts and subassemblies ensuring chemical resistance and safety in industries like chemical, manufacturing, and automotive.
