HCI Preferred Supplier 46930 Economy Miniature Ball Valve, 1/8 in Nominal, Female x Male End Style, Brass Body, FKM O-Ring/Stem/Seal Softgoods
HCI Preferred Supplier 46930 Economy Miniature Ball Valve, 1/8 in Nominal, Female x Male End Style, Brass Body, FKM O-Ring/Stem/Seal Softgoods
-
BrandGeneric
-
Manufacturer Part Number46930
-
CountryUSA
-
Temperature Rating356 deg F at 142 psi/212 deg F at 355 psi
-
Pressure Rating450 psi
-
MediaAir, Oil and Water
-
Trim MaterialHighly Inert PTFE Seat
-
TypeEconomy
-
Nominal Size1/8 in
-
Ball MaterialNickel Plated Brass
-
Softgoods MaterialFKM O-Ring/Stem/Seal
-
Domestic/ImportImport
-
Body MaterialBrass
-
End StyleFemale x Male
- Blow-out proof stem for safety
- 1/4 turn instantaneous on-off operation
- Quarter-turn handle design
- Non-adjusting FKM o-ring stem seal design never needs tightening
- Good for propane, Gas and diesel
- Not good for steam
-
UNSPSC40141607
-
Package Description1/PK
-
Catalog
Recently Viewed
HCI Preferred Supplier 46930 Economy Miniature Ball Valve, 1/8 in Nominal, Female x Male End Style, Brass Body, FKM O-Ring/Stem/Seal Softgoods
HCI Preferred Supplier 46930 Economy Miniature Ball Valve, 1/8 in Nominal, Female x Male End Style, Brass Body, FKM O-Ring/Stem/Seal Softgoods
Banjo® NIP100SH Pipe Fitting, Adapter, 1 in Nominal, MNPT x MNPT End Style, Polypropylene
GLASS REINFORCED POLYPROPYLENE. HEAVY DUTY (SCHEDULE 80). LIGHTWEIGHT WITH EXCELLENT STRENGTH. NPT THREADS. EXCELLENT CHEMICAL RESISTANCE. PRESSURE TO 150 PSI.
-BAJNIP100SH >
Browning® 1227966 MPB Straight Tooth Bevel Gear, 16 Diametral Pitch, 20 deg Pressure Angle, 64 Teeth, 4 in Dia Pitch, 0.48 in W Face, 5/8 to 1-3/8 in Dia Bore, Steel
Bevel and miter gearing is a form of gearing in which the tooth-bearing surfaces are the faces of the gears rather than the edges. In bevel and miter gearing, the gears are cone shaped. This allows the edges of the mating gears to mesh and transmit torque. The geometry of the mesh creates a 90 deg angle. As a result, this type of gearing is suitable for applications where a change of direction is required. Other designs exist to create other angles however 90 deg serves the majority of applications. In bevel and miter gearing the input and output shaft are intersecting. It is typical for bevel and miter gear reducers to have lower reduction ratios. For example, 5:1 and lower are typical and they are different than other types of gearing. Two types of bevel and miter gearing are typical. These are straight and spiral. As the name implies, the teeth of straight bevel gears are cut straight. This means that the teeth are oriented perpendicular to the outside edge of the gear. The teeth on spiral bevel gears are cut at an angle to the outside edge of the gear. This type of gearing is said to have helical teeth and the angle is called the helix angle. Bevel and miter gearing have proven reliable for many years. The use of this type of gearing extends across many industries. Some of these include food processing, woodworking, paper and textile.
TOILET BOWL NUT-BOLT-WASHER COMBO-RADCB105 >
Browning® 1228030 MPB Straight Tooth Bevel Pinion Gear, 12 Diametral Pitch, 20 deg Pressure Angle, 18 Teeth, 1-1/2 in Dia Pitch, 0.53 in W Face, 1/2 to 5/8 in Dia Bore, Steel
