HCI Preferred Supplier 943313 2-Piece Gas Ball Valve, 3/4 in Nominal, FIPS End Style, Forged Brass Body, Regular Port, PTFE/NBR Softgoods
HCI Preferred Supplier 943313 2-Piece Gas Ball Valve, 3/4 in Nominal, FIPS End Style, Forged Brass Body, Regular Port, PTFE/NBR Softgoods
-
BrandGeneric
-
Manufacturer Part Number943313
-
CountryUSA
-
Temperature Rating32 to 149 deg F
-
Port TypeStandard
-
Pressure Rating1/2, 5 psi
-
Trim MaterialBrass Stem
-
Type2-Piece
-
Nominal Size3/4 in
-
Ball MaterialBrass
-
Dimensions1.535 in H x 2.362 in W
-
Softgoods MaterialPTFE/NBR
-
Domestic/ImportImport
-
Body MaterialForged Brass
-
End StyleFIPS
- UL 125 For LP Gas 125 psig
- Aluminum alloy handle, plated steel handle nut
- PTFE packing sealing washer and NBR O-Ring
-
UNSPSC40141607
-
Package Description10/BX
-
Standards/ApprovalsCSA AGA 3.88 5 PSIG|UL 842|UL 258|UL 125|ASEM B16.44/CR91|ANSI Z21.15/CSA9.1
-
Catalog
Recently Viewed
HCI Preferred Supplier 943313 2-Piece Gas Ball Valve, 3/4 in Nominal, FIPS End Style, Forged Brass Body, Regular Port, PTFE/NBR Softgoods
HCI Preferred Supplier 943313 2-Piece Gas Ball Valve, 3/4 in Nominal, FIPS End Style, Forged Brass Body, Regular Port, PTFE/NBR Softgoods
Porter-Cable® 43218 Down Spiral Drywall Cutout Bit, 3/16 in Cut, 1/4 in Shank
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
3/4" -ID NEEDLE BEARING-IKOBA1210 >
Milwaukee® HOLE DOZER™ 49-56-0749 Hole Saw, 6 in Dia, 1.62 in D Cutting, Carbide Cutting Edge
The MILWAUKEE® 6" HOLE DOZER™ with Carbide Teeth Hole Saw features a new 3 TPI design that offers fast cuts with the durability of a bi-metal hole saw and life of a carbide hole saw. This Milwaukee hole saw provides the longest life in general purpose and extreme materials with the ability to cut through stainless steel, cast iron, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles, and more with ease. Deep gullets clear material fast while cutting, and Milwaukee's ALL-ACCESS SLOTS solve the frustration of plug removal for more productivity with less downtime between holes. The new slot design also provides increased pilot visibility for accurate placement and faster chip ejection keeping cuts cool. The HOLE DOZER™ with Carbide Teeth Hole Saw has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Milwaukee HOLE DOZER™ with Carbide Teeth Hole Saws are proudly made in the USA.
Milwaukee® 48-42-0500 General Purpose Heavy Duty Jig Saw Blade, 4 in L x 9/32 in W, 6 TPI, High Carbon Steel Cutting Edge, High Carbon Steel Body
Milwaukee® U-Shank High Carbon Steel Jig Saw blades are designed and manufactured for the professional user. Detail to the material used, tooth shape and sharpness make these blades cut clean, fast, and have a longer life. These blades fit U-Shank style jig saws. Includes 5 individual blades.
