HCI Preferred Supplier 940173L Ball Valve With Locking Handle, 1/2 in Nominal, NPTF End Style, Forged Brass Body, Full Port, PTFE Stem Seal Softgoods
HCI Preferred Supplier 940173L Ball Valve With Locking Handle, 1/2 in Nominal, NPTF End Style, Forged Brass Body, Full Port, PTFE Stem Seal Softgoods
-
BrandGeneric
-
Manufacturer Part Number940173L
-
CountryUSA
-
Temperature Rating-22 to 302 deg F
-
Port TypeFull
-
Pressure Rating600 psi WOG, 150 psi WSP
-
MediaCold Water, Oil, Gas and Saturated Steam
-
Trim MaterialBrass Stem/PTFE Ball Seat
-
Nominal Size1/2 in
-
Ball MaterialPolished Chrome Brass
-
Dimensions3.86 in H x 2.23 in W
-
Softgoods MaterialPTFE Stem Seal
-
Domestic/ImportImport
-
Body MaterialForged Brass
-
End StyleNPTF
- Suitable for full range of liquids and Gases
- Virgin PTFE stem packing seal, thrust washer and seats
- Yellow vinyl insulator on heavy duty plated carbon steel handles
- Low operating torque, adjustable stem packing gland
- Forged brass for more strength
- Hard chromium plated solid ball
- Minimal pressure drop due to large full size ports
- Bottom loaded, pressure retaining stem and bottom entry, blow-out proof stem
- Fast 1/4 turn open or close operation
- Deeper threads for better connections
- Not lead free
- Forged brass end connection, brass gland, steel spring inseat/handle/nut
-
UNSPSC40141607
-
Package Description50/BX
-
Standards/ApprovalsANSI B1.20.1|cCSAus Certified|FM Approved|UL842|UL258|UL125
-
Catalog
Recently Viewed
HCI Preferred Supplier 940173L Ball Valve With Locking Handle, 1/2 in Nominal, NPTF End Style, Forged Brass Body, Full Port, PTFE Stem Seal Softgoods
HCI Preferred Supplier 940173L Ball Valve With Locking Handle, 1/2 in Nominal, NPTF End Style, Forged Brass Body, Full Port, PTFE Stem Seal Softgoods
YR-1-1/2-X Sealed Yoke Cam Follower
1-1/2"-OD SEALED YOKE CAM FOLLOWER
8-OZ 16:1 CHAINSAW 2-CYCLE OIL-SPL11006 >
SELF LOCKING TAPE MEASURE SET PK/3 - KOMSL251612 >
1-1/2 X 1-GE, 1-1/2"-fpt X 1"-fpt 90 Degree Galvanized Elbow
1-1/2"-FPT X 1"-FPT 90 DEGREE GALVANIZED ELBOW-JPW11/2X1GE>
IDC Select® IDC SF-15/16 Finished Bore QD® Bushing, 15/16 in Dia Bore, 3-1/8 in Dia Barrel, 4-5/8 in Dia Flange, 2-1/16 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
