Pressure Regulating Valves
Mr.Heater® F276136 Low Pressure Propane Regulator, FPT x Soft Nose POL, 11 in WC
Mr.Heater® F276136 Low Pressure Propane Regulator, FPT x Soft Nose POL, 11 in WC
WATTS® 0009821 LF263A 3-Way Small Pressure Regulator, 1/4 in Nominal, FNPT End Style, 300 psi Pressure, Brass Body
This 1/4 inch lead free small water pressure regulator is used in small general purpose applications to regulate water pressure in piping systems using water and No. 2 fuel oil. It has an oversized orifice and is ideally used on beverage dispensing and paint spraying equipment, ice cube machines, humidifiers, drinking fountains, and other small process applications. It consists of a lead free brass body with an adjusting tee handle, NPT threaded female connections, three-way low water pressure gauge port, aluminum spring cage, Buna-N stainless steel disc, and a reinforced Buna-N diaphragm. The reduced water pressure range is 3 to 50 psi (0.2 to 3.4 bar) and is factory set at 15 psi (1.0 bar).
WATTS® 0009827 LF263A 3-Way Small Pressure Regulator, 3/8 in Nominal, FNPT End Style, 300 psi Pressure, Brass Body
This 3/8 inch lead free small water pressure regulator is used in small general purpose applications to regulate water pressure in piping systems using water and No. 2 fuel oil. It has an oversized orifice and is ideally used on beverage dispensing, paint spraying equipment, ice cube machines, humidifiers, drinking fountains, and other small process applications. It consists of a lead free brass body with an adjusting tee handle, NPT threaded female connections, three-way low water pressure gauge port, aluminum spring cage, Buna-N stainless steel disc, and a reinforced Buna-N diaphragm. The reduced water pressure range is 3 to 50 psi (0.2 to 3.4 bar) and is factory set at 15 psi (1.0 bar).
Recently Viewed
Hougen® 11075 Cutter Kit, 1/4 in D Cutting
7/16" 12-PT 3/8"-DR SOCKETS - ALL11209 >
RIGHT ANGLE SANDER-SIO1965>
1/4" X .005" SHORTENING SHIM-PRC26151>
Proto® TorquePlus™ J07531M Standard Length Socket, Metric, 3/4 in Square Drive, 31 mm
IDEAL Yellow 77 Wire pulling lubricant is a wax-based formula, and is the perfect general purpose lube. It is safe to use with most cable types except low-density polyethylene and semi-conducting jackets. It won't break down/separate after repeated exposure to freezing temperatures and dries to a thin, non-conductive film that won't clog conduit. Yellow 77 has a creamy texture and clings to cable throughout long pulls. Apply conveniently and uniformly by hand or brush. It is a homogeneous blend that requires no mixing and forms surface coat to control evaporation, so it won't dry out. It is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. Lubricant remains stable in high temperature of 32°F to 130°F (0°C to 54°C). It comes in 1 qt squeeze bottle, 1-gallon bucket, 5-gallon bucket, and 55 gallon drum. Lubricant is UL listed.
