Dixon Valve 2"-FACE 1/4"MOUNT 15-PSI DRY GAUGE DXN GL-100
Midland Industries 80-001 Dry Standard Pressure Gauge, 0 to 15 psi, 1/4 in Connection, 2 in Dial
-
BrandMidland Industries
-
UPC089109865734
-
Manufacturer Part Number80-001
-
CountryUSA
-
Temperature Rating-40 to 150 deg F
-
MaterialSteel Case
-
Pressure Range0 to 15 psi
-
TypeDry Standard
-
Connection Size1/4 in
-
Mounting TypeLower
-
Accuracy+/- 3-2-3 %
-
Dial Diameter2 in
- For long, reliable service under rugged conditions
- Black aluminum pointer
- C-shaped bronze safety bourdon tube
- Do not use in connection with drinking water
- Wash hands after handling
- Polycarbonate window
- Corrosion-resistant, ABS plastic case
-
UNSPSC41112400
-
Package Description1/PK
-
Standards/ApprovalsPROP65: This product can expose you to chemicals, including chromium, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.
-
WarrantyLimited
-
Catalog
Recently Viewed
Midland Industries 80-001 Dry Standard Pressure Gauge, 0 to 15 psi, 1/4 in Connection, 2 in Dial
LARGE LEATHER PALM GLOVES (PR)-GREWA4183B>
Forged Steel Quenched & Tempered Regular Eye Bolt. Recommended For In-Line Pull. Fatigue Rated At 1-1/2 Times. The WLL at 20000 Cycles. Meets Or Exceeds All Requirements of ASME B30.26
The Power-Stud® Anchor, is a fully threaded, torque controlled, wedge expansion Anchor. It is available in a threaded version suitable for applications in solid concrete and grout filled concrete masonry. The threaded version is produced in Type 304 and Type 316 stainless steel.
Milton 1833 1/4" FNPT H Style Coupler 3/8" Basic flow size Maximum 300 pounds per square inch Buna-N Seals 67 Standard cubic feet per minute 250 degrees Fahrenheit maximum temperature
Milton® 1833 H Style Coupler With Buna-N Seal, 1/4 in, FNPT, Steel, Domestic
MasterDrive 6B66SK Type A-1 Groove Sheave, 1/2 to 2-5/8 in Dia Bore, 6.95 in Dia Outside, 6 Grooves, 6.2 in (A)/6.6 in (B) Dia Pitch, 4.75 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
