GENERAL® CT101 Line Voltage Tester, 80 to 500 VAC/VDC Max Measurable
GENERAL® CT101 Line Voltage Tester, 80 to 500 VAC/VDC Max Measurable
-
BrandGENERAL®
-
UPC681035510254
-
Manufacturer Part NumberCT101
-
CountryUSA
-
Maximum Measurable Voltage80 to 500 VAC/VDC
-
Frequency Rating50/60 Hz Hz
- Visual indication of AC or DC voltage
- Easy to use
- Safe for CAT III 600 V use
- Insulated housing
- Pocket clip on back
- 0.3 A maximum rated at 50/60 Hz
- 18 AWG thick lead
- 41 to 104 deg F operating temperature at <80% RH
-
Alternative Part Number51025
-
UNSPSC41113676
-
Standards/ApprovalsUL Listed
-
Owners/User Manual
Recently Viewed
GENERAL® CT101 Line Voltage Tester, 80 to 500 VAC/VDC Max Measurable
Proto® J1284 Combination Wrench, 2-9/16 in Wrench, 12 Points, 15 deg Offset, 29-3/4 in OAL, Alloy Steel, Satin
Proto® J1284 Combination Wrench, 2-9/16 in Wrench, 12 Points, 15 deg Offset, 29-3/4 in OAL, Alloy Steel, Satin
Milwaukee® 48-20-5040 Heavy Duty Thin Wall Core Bit, 2-1/2 in Drill - Fraction, 2.5 in Drill - Decimal Inch
Milwaukee's Carbide tipped core bits are ideal for drilling large holes where the depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thin wall core bits ranges from 2-13/16 in. to 3-3/16 in. The thin wall construction is ideal for smaller hammers and newer concrete. The inside core must be removed by the operator before deeper drilling can be accomplished. Multiple extensions and adapters are available to allow for deeper holes to be drilled. The appropriate drive shank must be used to drive the core bit. Use of center pin and guide plate is recommended for positioning and starting a 1-1/4 in. hole and larger. Use of center pin and guide plate is not recommended for positioning and starting a 1-1/8 in. hole or smaller. Milwaukee Carbide tipped core bits are available from 1 in. to 6 in. diff. Includes core bit centering pin and guide plate.
Bostitch® 16S2-31 Heavy Duty Medium Crown Staples, 1-1/4 in L Leg, Chisel Point, Steel, 1 in W Crown
Bostitch® 16S2-31 Heavy Duty Medium Crown Staples, 1-1/4 in L Leg, Chisel Point, Steel, 1 in W Crown
5/16"-HOSE X 1/8"-MALE PIPE THREAD HOSE BARB - DXNBN251 >
1-1/32" 12-PT FULL POLISH SHORT COMBINATION WRENCH-ARS25111 >
