GreenleeĀ® LT-100 Lamp Tester, 9 V Battery (NEDA 1604/JIS 006P or IEC 6LR61)
-
BrandGreenleeĀ®
-
UPC783310075417
-
Manufacturer Part NumberLT-100
-
CountryUSA|Canada
-
Power Source9 V Battery (NEDA 1604/JIS 006P or IEC 6LR61)
- Tests HID and fluorescent lamps
- Live conductor sensing
- Compact, rugged housing
- 0 to 5 Mohm (<7 uA test current) continuity verification
- 3 kV/160 kHz (<200 uA test current) lamp tester voltage
- 60 to 250 VAC, 40 to 60 Hz live conductor indication
- 250 VAC/DC overvoltage protection
- 14 to 122 deg F temperature range
- 0% to 70% (non-condensing) relative humidity
- IP 40 protection category
- CAT II 250 V measuring category
-
Alternative Part Number07541
-
UNSPSC41113683
-
Package Description1/PK
-
Standards/ApprovalsARRA Compliant|C/US UL Listed|CE Certified|RoHS Compliant
-
WarrantyLimited
-
Warranty Information
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
GreenleeĀ® LT-100 Lamp Tester, 9 V Battery (NEDA 1604/JIS 006P or IEC 6LR61)
DixonĀ® G400T GruvlokĀ® Grooved Fitting Gasket, 4 in Nominal, Buna-N, Domestic
DixonĀ® G400T GruvlokĀ® Grooved Fitting Gasket, 4 in Nominal, Buna-N, Domestic
ProtoĀ® J005L Long Blade Feeler Gauge, 1 Blade, 12 in L x 1/2 in W x 0.005 in THK
Made from 1/2 in W, C1095 close grain, high carbon spring steel. Material is ground and polished to precision tolerances. Steel feeler gage is used in most general maintenance and tool and die applications. Thickness is clearly marked every 6 in metric and decimal. Precision BrandĀ® feeler gage is used in manufacturing and maintenance operations wherever setting close spacing or checking extremely tight tolerances is required.
MarkalĀ® Silver-StreakĀ® 096006 High Performance Metal Marker With Refill, 1/8 in Round Tip, Silver
SILVER-STREAK ROUND W/HOLDER CARDED, For welding, metal layout and fabrication, MarkalĀ® Weld-RiterĀ® Refillable Metal Markers with Silver-Streak lead are ideal when highly-visible, torch-resistant marks are required during metal layout and fabrication work. The unique reflective lead is more visible through a welder's filter plate and will not rub, burn or blow off like soapstone. Marks on all metal surfaces including oily or wet.
Made from 1/2 in W, C1095 close grain, high carbon spring steel. Material is ground and polished to precision tolerances. Steel feeler gage is used in most general maintenance and tool and die applications. Thickness is clearly marked every 6 in metric and decimal. Precision BrandĀ® feeler gage is used in manufacturing and maintenance operations wherever setting close spacing or checking extremely tight tolerances is required.
