Precision Measuring Accessories
Starrett® PT99006 Lock Bolt Assembly, For Use With 12 in, 18 in or 24 in Square Heads
Lock bolt Assembly.
Starrett® PT18718 Snug Complete, 5/16 in Dia, 3/32 to 1/4 in Holding Capacity, For Use With 196 and 196M Universal Back Plunger Dial Indicator, 252 Height Transfer Gage, 57 and 257A and B Surface Gage
Post hole has a 5/16" diameter and 3/32-1/4" holding capacity. Can be used on our 252 Height Transfer Gage, 57 and 257A and B Surface Gages, on 657A Magnetic Base and Swivel Post Assembly.
Starrett® C11-1224 Center Head, 3-7/64 in L x 47/64 in W x 3-23/32 in H, For Use With Combination Square, Sets and Bevel Protractor, Cast Iron, Black Wrinkle
Black Wrinkle-finished, cast iron steel center head. Fits any 12"/300mm and larger blades only.
Starrett® 25R Shockproof Contact Point Set, For Use With AGD Dial Indicator, High Grade Steel
The Starrett Contact Point Set includes: 14 points with #4-48 screw thread to fit AGD indicators; a regular 1/4" (6.3mm) long point; 9 special form points; a 28 shock absorbing anvil; and 3 extra long points 1/2", 3/4" and 1" (13, 19, 25mm) long. The set features high grade steel, hardened and ground. All points are mounted on a convenient aluminum ring for safe keeping and easy selection. Contact Point SET.
Recently Viewed
SINGLE GROOVE 7/8" -ID A-BELT SHEAVES-BRWAK30X7/8 >
Easy to use.
Economical.
Lightweight.
Maximum operating pressure 100 psi
Minimal fluid spillage.
Reduces risk of exposure.
SpillageData: 2" &mdash: 2.6 ML
Unrestricted 1½" flow.
Wide range of chemical resistance.
FKM seals
When properly installed and operated, the assembly will not accidentally separate while fluid is flowing preventing costly mishaps.
PIX B96/02 IS A CLASSICAL V-BELT, 99" OUTSIDE LENGTH, 5/8" TOP WIDTH, 13/32" THICKNESS, 2 RIB
KEVLAR© IS A HIGH STRENGTH BELT THAT CAN WITHSTAND HIGHER SHOCK LOADS, REVERSE BENDING AND TWISTING OVER LONGER PERIODS OF TIME. THE STRENGTH COMES FROM THE CORDS, WHICH IS A HIGH TENSILE STRENGTH ARAMID FIBER. THESE BELTS USE A SPECIAL OUTER DRY WRAP, WHICH MAKES THEM SUITABLE FOR CLUTCHING APPLICATIONS, LAWN MOWERS OR ANY DRIVES WITH FREQUENT STARTING & STOPPING.
-PIXB96/02 >
16 TOOTH SPROCKETS FOR #100 CHAIN-BRW100B16 >
31/64" DRILLBIT-REPX60031/64>
22 TOOTH SPROCKETS FOR #100 CHAIN-BRW100B22 >
