Markal GREEN LUMBER CRAYONS MRK 80356
Markal® 080356 200 Economical Wax Based Lumber Crayon, 1/2 in Hex Tip, Green
-
BrandMarkal®
-
UPC048615803562
-
Manufacturer Part Number080356
-
CountryUSA|Canada
-
Temperature Rating-20 to 50 deg F
-
Tip Size1/2 in
-
Tip TypeHex
-
ColorGreen
-
TypeEconomical Wax Based
-
Series200
-
Dimensions4-5/8 in L
- Known in construction trades as
- Formulated for weather and fade resistant marking on most surfaces
- Special softer formula allows for superior marking in cold climates
- Soft, standard-grade lumber crayon for general use marking and works well in cold climates
- Wax-based mark is weather and UV resistant
- Lead free
- Standard 1/2 in hex shape fits the NO 109 Peterson holder, NO 106 holder and NO 108 holder
- Wood, concrete, stone, plastic, rubber and rough metal surface use
| Competitor Name | Cross-Reference Number |
|---|---|
| Fastenal | 2103511 |
-
UNSPSC27112300
-
Package Description144/CS
-
Specification Sheet
Recently Viewed
Markal® 080356 200 Economical Wax Based Lumber Crayon, 1/2 in Hex Tip, Green
1" LIGHT DUTY PLAIN U-BOLT LOCKNUTS-BLNB35011 >
8" HALF-ROUND BASTARD FILES-JK-8HRB >
Weller® 7235 Standard Soldering Tip, For Use With 8200, D550 and 7200 Lightweight Soldering Guns, Solid Copper
Weller® 7235 Standard Soldering Tip, For Use With 8200, D550 and 7200 Lightweight Soldering Guns, Solid Copper
Milwaukee® 48-20-5155 Heavy Duty Thick Wall Core Bit, 4 in Drill - Fraction, 4 in Drill - Decimal Inch
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) Spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5174 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.
GP® 2126D Deep Length Socket, 1/2 in, 13/16 in, 12 Points
