Browning® 1296987 Tightener Shaft, 1-1/2 in Dia x 6 in L Shaft, 7-11/16 in OAL
Browning® 1296987 Tightener Shaft, 1-1/2 in Dia x 6 in L Shaft, 7-11/16 in OAL
-
BrandBrowning®
-
UPC662289164240
-
Manufacturer Part Number1296987
-
CountryUSA
-
Thread Length1-5/16 in
-
Thread Size1-8
-
Shaft Diameter1-1/2 in
-
Shaft Length6 in
-
Overall Length7-11/16 in
-
Suitable For Use WithFFTQ-1 Fixed Flange Tightener
- Zerk fitting provided as standard to allow relubrication
- Hardened surface for use with needle bearing idlers
- Mating Spur Gears must have same pressure angle and pitch
- Standard Gear Rack - 1. Manufactured From Mild Steel, 2. 14 1/2 Pressure Angle - 32 to 3 DP, 3. 20 Pressure Angle - 20 to 4 DP, 4. 4 and 6 FT Available from Stock, 12 FT May Be Available on Some Sizes
- Modification Options Available - 1. Cut to Desired Length, 2. Milled and Matched Ends, 3. Drilled or Drilled and Tapped Holes for Mounting
-
Alternative Part NumberN6 TIGHTENER SHAFT
-
UNSPSC31163200
-
Package DescriptionEACH
-
Warranty1 Year
-
Warranty Information
-
Catalog
Recently Viewed
Browning® 1296987 Tightener Shaft, 1-1/2 in Dia x 6 in L Shaft, 7-11/16 in OAL
Browning® 1296987 Tightener Shaft, 1-1/2 in Dia x 6 in L Shaft, 7-11/16 in OAL
Appleton® UNILETS™ X75A Type X Conduit Outlet Body, 3/4 in Hub, Form 85, 7 cu-in, Sand Cast Aluminum, Epoxy Powder Coated
Appleton® Form 85™ UNILETS™ Conduit Outlet Bodies, Covers and Gaskets are used to connect and change direction of conduit runs. In addition to making bends in a conduit system, they allow connections for branch runs. These conduit bodies serve as pulling fittings and permit access to conductors for splicing and maintece.
Dodge® 083413 First Stage Pinion Gear, 78 Diametral Pitch, 73 Teeth, 1-1/2 in Dia Pitch
Dodge® 083413 First Stage Pinion Gear, 78 Diametral Pitch, 73 Teeth, 1-1/2 in Dia Pitch
Browning® 767337 VPLE 100 Intermediate Duty Pillow Block Ball Bearing, 1-7/16 in Dia Bore, 4-9/16 to 5-7/16 in L Bolt Center-to-Center, 1-13/16 in Base to Bore Centerline, 6-3/4 in OAL x 3-5/8 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
30" HEAVY DUTY INDUSTRIAL EXHAUST FAN - FANVI3014>
1 QUART OF DAD'S EASY SPRAY PAINT REMOVER-JWH773794 >
