Gardner Bender LTG-400 Liquid Waterproof Seal Electrical Tape, Rubber, Green
This rubber based brush-on liquid tape forms a protective, waterproof, UV-resistant, dielectric seal around spliced electrical wire to protect against corrosion, shortages, electrical shock and vibration. The quick drying fluid cures in 24 hours and will not deterioriate or unravel like traditional tape. Resistant to chemicals, solvents, saltwater and other common fluids, to achieve connections that last for decades. To apply, shake well then use brush built into the cap to liberally brush the liquid over the splice/connection. Allow to dry for 5 minutes and then re-apply if a thicker application is needed. Ideal for both indoor and outdoor use and under extreme environments including automotive, marine, farm/ag and RV. 4 oz bottle temp range: -30 to 200 degrees F and -34 to 93 degrees C.
-
BrandGardner Bender
-
UPC032076065270
-
Manufacturer Part NumberLTG-400
-
CountryUSA
-
Material TypeRubber
-
Maximum Operating Temperature200 deg F
-
ColorGreen
-
TypeLiquid Waterproof Seal
-
Minimum Operating Temperature-30 deg F
-
Specifications MetCSA C22.1, NFPA 70/71
- Forms a protective, waterproof, UV-resistant, dielectric seal around spliced electrical wire to protect against corrosion and shortages
- Formula is resistant to chemicals, solvents, saltwater and other common fluids
- Quick drying formula cures in 24 hr
- Will not unravel or deteriorate like traditional tape
- Remains flexible in extreme temperatures and climates -30 to 200 deg F and -34 to 93 deg C
- Dries black
-
Alternative Part Number16793934
-
UNSPSC31201502
-
IDEA Index ID16793934
-
Standards/ApprovalsUS Federal Specifications 29 CFR 1910.1200
-
Warranty1 year
-
Specification Sheet
Recently Viewed
Gardner Bender LTG-400 Liquid Waterproof Seal Electrical Tape, Rubber, Green
This rubber based brush-on liquid tape forms a protective, waterproof, UV-resistant, dielectric seal around spliced electrical wire to protect against corrosion, shortages, electrical shock and vibration. The quick drying fluid cures in 24 hours and will not deterioriate or unravel like traditional tape. Resistant to chemicals, solvents, saltwater and other common fluids, to achieve connections that last for decades. To apply, shake well then use brush built into the cap to liberally brush the liquid over the splice/connection. Allow to dry for 5 minutes and then re-apply if a thicker application is needed. Ideal for both indoor and outdoor use and under extreme environments including automotive, marine, farm/ag and RV. 4 oz bottle temp range: -30 to 200 degrees F and -34 to 93 degrees C.
5/16" -TUBEX1/4" -MALE PIPE THREAD BRASS UNION-JWH431562 >
Similar to housing rings. These external rings accommodate components with large chamfers and radii. Handy kit for shop toolroom or toolbox. On hand when needed saves time and money. Plastic compartment box is easy to store. The Precision Brand® 140-piece retaining ring Assortment contains: 20 each of 1/2 in, 9/16 in, 19/32 in and 5/8 in, 15 each of 11/16 in and 3/4 in and 10 each of 7/8 in, 1 and 1-1/4 in.
Schneider Electric Zelio™ RM4JA32F Current Measurement Relay, 100/130 VAC, 0.3/15 A, 2CO, 0.3/0.5 A Trip Delay
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Machined type Needle Roller Bearings feature low sectional height and large load ratings. A highly rigid outer ring makes these bearings ideal for light alloy housings as well.
Crosby® 1014285 A-342-3/4 W Master Link, 3/4 in Trade, 12300 lb Load, 80 Grade, Oblong/Oval, Alloy Steel
Crosby® 1014285 A-342W Master Link, 3/4 in Trade, 12300 lb Load, 80 Grade, Oblong/Oval, Alloy Steel
